Home > Puma (Tdci) > Which ball joints to buy |
|
|
zone30 Member Since: 07 Sep 2012 Location: Gent Posts: 669 |
Lots of choises, but I don't know which are good?
http://www.land-rover-parts-shop.com/en/ui...69&af= Or other brands? |
||
5th May 2016 12:47pm |
|
nickhodgson Member Since: 08 Dec 2009 Location: Zambia Posts: 174 |
Rear axle ball joint or tie rod ends?
Lemforder may well have sold some tie rod ends to LR at some point or may even still do but my experience from a year ago is that what arrived in a lemforder box was not the same as fitted to the vehicle from the factory. The lemforder part was not the same height as the LR part. Additionally the other makes (particularly the one with grease nipple) have a lower quality rubber boot that does not last long. In the past I have order some Britpart OEM tie rod ends that were identical to the LR ones but don't know what they supply now. With the lemforder rear axle ball joint it is again looking different to the LR one. Some if these OEM suppliers make one version for LR and another for aftermarket and the suppliers (allmakes, britpart etc) appear to use the OEM Manufacturer term rather loosely if you are expecting the same quality item in a different box. Hope that helps. 1995 300tdi Defender 90 P/UP 2011 Puma Defender 130 D/C 2000 300tdi Defender 110 P/UP 2015 Discovery 4 SDV6 HSE |
||
6th May 2016 9:21am |
|
zone30 Member Since: 07 Sep 2012 Location: Gent Posts: 669 |
It does help thx!
I'm looking for good quality steering and track rod ends. |
||
7th May 2016 7:14pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis