 | Home > Puma (Tdci) > ? Daft Question of the day |
 
|
|
|
| Stiff1 Member Since: 09 Dec 2014 Location: Cornwall Posts: 595   
|
Was wondering how difficult if would be to move the transfer lever over to the left about 5cm?
Obviously not the attachment but rather bend / weld an extra section in the bar. I have checked and It would not foul the gear stick. So, would applying force to bend the bar while fitted do harm to the box/ linkages below? I suspect it would How easy is it to remove the stick to make adjustments on the bench? Already have removed handle so I mean the whole assemble like this. http://ebayapi.loc8apartltd.netdna-cdn.com...WbrZu/.JPG |
||
19th Apr 2016 9:53am |
|
| Go Beyond Member Since: 30 Jan 2012 Location: Headcorn, Kent Posts: 6678
|
Its four bolts that are accessed from above so easy to remove
|
||
|
19th Apr 2016 10:26am |
|
| Stiff1 Member Since: 09 Dec 2014 Location: Cornwall Posts: 595
|
Follow up daft question...
Is it possible to remove, keeping in high range so the car can still be used? |
||
|
19th Apr 2016 10:37am |
|
| MartinK Member Since: 02 Mar 2011 Location: Silverdale (Lancashire/Cumbria Border) Posts: 2665 
|
yes - see also http://www.defender2.net/forum/topic29132.html
you could just leave in in H and remove the lever and linkage... Defender "Puma" 2.4 110 County Utility (possibly the last of the 2.4's) |
||
|
19th Apr 2016 10:44am |
|
| Stiff1 Member Since: 09 Dec 2014 Location: Cornwall Posts: 595
|
Great thanks all, I will get on it now.
|
||
|
20th Apr 2016 10:03am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
