GraysDefender
Member Since: 11 Apr 2016
Location: Cornwall
Posts: 3
 
|
Hi,
I need some help to sort out a mystery.
I am in the process of rebuilding 2007 Puma I bought as a rolling chassis from an insurance company after it had been stolen and stripped, not totally comfortable with the ethics of it, but was looking for a project to take my mind of things after having a load of chemo etc. Anyway, I have hit a head scratcher.
The engin and everything around it was all intact, apart from the radiator and inter cooler, so got a second hand pair from well know auction site and put them in today, problem I have is, radiator has two small inlet/outlets bottom drivers side, one front, one back of radiator, but I only have a hose for front one. Have looked all round engin and can't find an outlet without a hose (did find a Barclays biro, could have been messy!). Have checked and all Puma TDCi rads on auction site and elsewhere have the two inlet/outlets - so help please - what's going on?
My plan is to plug the back connector and fill system to see if water comes out from an orifice I haven't spotted.
|
11th Apr 2016 7:15pm |
|
Rickydodah
Member Since: 14 Jul 2014
Location: East Sussex
Posts: 1091
|
I had the same issue with a replacement radiator as it appeared that it would also fit the TD5. Some are supplied with a blanking hose, mine wasn't so I made one and fitted to the rear of the rad  I started with nothing and still have most of it left!
|
|
12th Apr 2016 9:18am |
|
