↓ Advertise on Defender2 ↓

Home > Technical > Aligning wheel carrier
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Culminator



Member Since: 30 Apr 2013
Location: West sussex
Posts: 305
Aligning wheel carrier
Sold my tdi last year and bought it back 4 months later. Previous owner had rear door painted but whoever did it put the wheel carrier back on skew-whiff. I can't find any way of adjusting it and I don't remember the carrier being at such an angle. Help!



Click image to enlarge


Click image to enlarge
Post #506433 20th Feb 2016 5:01pm
View user's profile Send private message View poster's gallery Reply with quote
leeds



Member Since: 28 Dec 2009
Location: West Yorkshire
Posts: 8580
United Kingdom 
That wheel carrier certainly looks a bit skew whiff.

Which wheel carrier is it? Is it fitted to a pre 02 door?

I would suggest you take the rear door card off and check if the door mounting plate has been reinstalled correctly.

Just noticed TDi so pre 02 door. Reinforcing ribs inside door should form a central square. I wonder if the door plate has been rotated 180 degrees? Difficult to say from photograph if that would improve the situation or not



Brendan
Post #506606 21st Feb 2016 9:26am
View user's profile Send private message View poster's gallery Reply with quote
Culminator



Member Since: 30 Apr 2013
Location: West sussex
Posts: 305
Hi Brendan, yeah it's a 98 tdi. I've taken door card off and all looks undisturbed. Rotating the plate would actually make it worse. I'm sure it wasn't like this when I had it previously. If there's no adjustment available, I guess I'll just re drill the plate.
Post #506619 21st Feb 2016 10:10am
View user's profile Send private message View poster's gallery Reply with quote
excossack



Member Since: 22 Feb 2012
Location: North West
Posts: 5842
United Kingdom 1999 Defender 110 Td5 SW Caledonian Blue
Mine is sitting quite right either (mine a 99 110), A mate fitted one to his 110 (1988) and his fits fine.
I think my issue is the two side hinge bolts are not aligned i.e with a plumb line they don't line up.

So I will be doing a similar job as you and trying to align the carrier better.

Have you got a picture viewed from the rear of the 110 ?

Mine is a Bearmach carrier 1999 Defender TD5 110

Regards
John M0VAZ
Econet Station 48 no clock
Post #506635 21st Feb 2016 11:36am
View user's profile Send private message View poster's gallery Reply with quote
leeds



Member Since: 28 Dec 2009
Location: West Yorkshire
Posts: 8580
United Kingdom 
Which make of wheel carrier is it?

Have a look here which shows fitting of a Bearmach wheel carrier. The Bear mach wheel carrier has a small dog bone connecting door to main arm.

The Safari Equip has a longer dog bone

Britpart DA2232 fitting instructions here has a piston between door plate and main arm

So what I am thinking is that the door plate is on the wrong way and that a jointing piece is missing. However not knowing make of wheel carrier makes it more difficult to work out what might be wrong/missing


Brendan
Post #506853 21st Feb 2016 10:20pm
View user's profile Send private message View poster's gallery Reply with quote
Culminator



Member Since: 30 Apr 2013
Location: West sussex
Posts: 305
Hi Brendan, thanks for posting that. Looks like I have the Bearmach one and in the last pic it shows the carrier at roughly the same angle as mine, so maybe it's ok and I just didn't remember it was like this before!
Post #507159 22nd Feb 2016 10:14pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums