DEFENDER2.NET - View topic - has the main dealer F@&K£% something??!! NANOCOM expert

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > In Car Electronics > has the main dealer F@&K£% something??!! NANOCOM expert

Page 1 of 1

Print this entire topic ·

dumptruckface

Member Since: 24 Aug 2015
Location: Somerset
Posts: 39

2012 Defender 110 Puma 2.2 XS DCPU Orkney Grey

has the main dealer F@&K£% something??!! NANOCOM expert

ok so i got a nanocom today and on connecting it up there are some items that im wondering if they are correct or not, when im looking at the live engine data, and inputs im not geting what i would expect to see (im assuming these inputs are live and should change as the value of said input changes?)im getting the following

alternator lamp - ON (should this be saying its on?? i have no alternator warning lamp on?
Crank reference fault - ON!??
water in fuel - ON!!??
A/C request - OFF even when i turn the A/C on??
A/C pressure high- ON
A/C clutch - ON
Ignition status - OFF (even tho the engine is running)?
Starter motor enable - ON even thos the engine is started and running.
Brake light input -OFF and brake light - OFF even when i push the brake pedal and the rear brake lights are on, or the handbrake light is on.
its hshowing my coolant temp as -40
and my inlet air temp as -28!!
and lastly its showing my fuel tank volume as 0 zero.

im getting concerned as the dealer managed to put a dead short across my battery at the begining of the week which caused a small fire (in their words) its all fixed and i have no evidence of any problems except im now wondering if they have damaged something, or in fact these weird readings are just the nanocom not doing its job properly? im stuck and concerned at the same time.

Does anyone have a tdci 2.2 puma in Taunton that wants me to hook a nano com up to so we can compare readings? or even better does anyone locally have nanocom and experience with it?

19th Feb 2016 7:11pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20453

You could try asking Gary @ Alive tuning. Maybe worth a shot, if he can't help with the Nano then could make give you some ideas.

19th Feb 2016 7:22pm

mk1collector

Member Since: 17 Sep 2009
Location: West Yorkshire
Posts: 6769

Have you asked on the nanocom forum? Ray
My build thread
http://www.defender2.net/forum/topic17615.html

19th Feb 2016 7:55pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum