↓ Advertise on Defender2 ↓

Home > Maintenance & Modifications > Fitting a check temp sensor
Post Reply  Down to end
Page 4 of 4 <1234
Print this entire topic · 
Furball



Member Since: 31 Jan 2016
Location: Wiltshire
Posts: 37
United Kingdom 2015 Defender 90 Puma 2.2 XS CSW Corris Grey
Thanks Richard. I did find them for £59 outside of Amazon, so wanted to make sure I was getting the best deal.
Post #499039 1st Feb 2016 11:31am
View user's profile Send private message View poster's gallery Reply with quote
Jamie W



Member Since: 28 Mar 2012
Location: Herts
Posts: 30
United Kingdom 2009 Defender 90 Puma 2.4 HT Galway Green
JB sorry for not responding sooner. The link Richard posted seems to be the one. If you follow the instructions previously posted you will have no problems. If you can remove the steering wheel before cutting the hole it will aid access. I used a junior hacksaw blade (minus the handle) to cut the hole as you have better control. Make sure you mask the dash and drill 4 holes in each corner of the aperture then open up with the junior hacksaw blade.

Good luck
Jamie
Post #504155 12th Feb 2016 10:35pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 4 of 4 <1234
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums