 | Home > My Defender > What Did You Do In Your Defender Today |
 
|
|
|
| RoddyK05 Member Since: 08 Apr 2015 Location: Inverclyde Posts: 633   
|
Started to cut out the bulkhead to fit a MUD removal bar. Longest job so far was pulling all the junk out of the car before I started. Had to set up a couple of bashas to keep the rain off as the weather was a bit minging but it's all good. I discovered that I had to cut the panel from the rear despite marking it out on the front - the sole plate on the jigsaw was sitting on the ridge and keeping the blade above the line. Was going well, but the battery on my Dremel died so called it a night.
 Click image to enlarge |
||
7th Nov 2015 10:03pm |
|
| Stacey007 Member Since: 25 Sep 2015 Location: Cheshire Posts: 3745 
|
Collected a gym spec treadmill in the 110
Very very heavy !! Click image to enlarge |
||
|
7th Nov 2015 10:04pm |
|
| Grenadier Member Since: 23 Jul 2014 Location: The foot of Mont Blanc... Posts: 5804  
|
Ok, not today, but have been meaning to post since last week. Used the beast to gain a little altitude before going for a walk towards the 'Dome de Miage'. Stunning weather, beautiful walk starting in a picturesque village of farmhouses (Le Champel), initially through a lovely forest, but as you turn a corner and head up the valley you are faced, slap bang in front of you, with the Western flank of Mont Blanc, the direction of attack used for the first successful summit attempt in 1786 and now known as the Royal Route. Truly majestic and highly recommended. Saw a handful of Bouquetin (Ibex) as well, just a few metres away.
Click image to enlarge Monsieur Le Grenadier I've not been everywhere, but it's on my list..... 2011 Puma 110DC - Corris Grey |
||
|
8th Nov 2015 9:20am |
|
| excossack Member Since: 22 Feb 2012 Location: North West Posts: 5842 
|
Yesterday went to the Neil Howard Stages at Oulton Park. Four recoveries, one suspended and three straight tows.
Here is the suspended. Click image to enlarge 1999 Defender TD5 110 Regards John M0VAZ Econet Station 48 no clock |
||
|
8th Nov 2015 12:58pm |
|
| RoddyK05 Member Since: 08 Apr 2015 Location: Inverclyde Posts: 633
|
Finished off the MUD bulkhead removal bar and also fitted a pair of MUD seat rails to my drivers seat. When fitting the bulkhead bar, don't strive to make too neat a job of the cutting out by following the scribed line too closely, I did and discovered that I really needed to take out about 2mm more metal all round
 After this the fitting of the bar was very straight forward, glad I tackled it myself. Doing the jobs on the car myself, I am starting to get more intimate with the insides of the motor, discovering where cables run, where the wee holes are that you can poke a wire down inside to hide it etc. One thing I had previously purchased was a trim removal kit, this has been very handy for removing the likes of the 'christmas tree' type clips and the like. If you are contemplating doing a lot of the interior work yourself then I would recommend purchasing a set.
Pics are stripped and ready to start, bar fitted and interior back in. Click image to enlarge Click image to enlarge Click image to enlarge |
||
|
9th Nov 2015 12:47am |
|
| bpman Member Since: 21 May 2008 Location: Oslo Posts: 8069 
|
Checked my NRL's ... All ok and working 100%
|
||
|
9th Nov 2015 8:22pm |
|
| ericvv Member Since: 02 Jun 2011 Location: Near the Jet d'Eau Posts: 5816 
|
A rare event.... Took it home from the office tonight, pitch dark, and was reminded how good my EVOs really are. You never actually own a Defender. You merely look after it for the next generation.
http://youtu.be/yVRlSsJwD0o https://youtu.be/vmPr3oTHndg https://www.youtube.com/watch?v=_GtzTT9Pdl0 https://www.youtube.com/watch?v=ABqKPz28e6A https://www.youtube.com/watch?v=rLZ49Jce_n0 https://www.youtube.com/watch?v=XvAsz_ilQYU https://www.youtube.com/watch?v=K8tMHiX9lSw https://m.youtube.com/watch?v=dxwjPuHIV7I https://vimeo.com/201482507 https://www.youtube.com/watch?v=ZSixqL0iyHw |
||
|
10th Nov 2015 6:22pm |
|
| SailingTom Member Since: 19 Nov 2013 Location: ESSEX Posts: 1720
|
Went and picked up a heavy duty hood stick set for my 110 from Purely Metal in Suffolk and did a couple of lanes before I came home
 |
||
|
10th Nov 2015 6:25pm |
|
| keith Member Since: 15 Aug 2012 Location: Edinburgh Posts: 2211
|
Another few touch ups and getting closer to the desired results.
Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge |
||
|
12th Nov 2015 6:20pm |
|
| Venomator Member Since: 25 Aug 2014 Location: Peterborough Posts: 2087
|
Oh my...
My envy is Green, much...  Rog...
The GREEN One... MY2016 Urban Truck Build Thread - http://www.defender2.net/forum/topic40548....al[/color] |
||
|
12th Nov 2015 7:28pm |
|
| Pickles Member Since: 26 May 2013 Location: Melbourne Posts: 3782  
|
Keith, beautiful attention to detail there.
Very impressive, Pickles. |
||
|
12th Nov 2015 8:59pm |
|
| keith Member Since: 15 Aug 2012 Location: Edinburgh Posts: 2211
|
Every part is 100% original. Still lots to do .
Cheers |
||
|
12th Nov 2015 9:41pm |
|
| jomara Member Since: 26 Oct 2009 Location: Lanarkshire Posts: 1790 
|
Looks stunning Keith
  2014 110 2.2TDCi XS Station wagon
1971 Bowler Tomcat 88 4.2 V8 Auto 2022 110 D250 XS Edition - Gone 2024 110 D250 X-Dynamic HSE |
||
|
12th Nov 2015 9:43pm |
|
| gilarion Member Since: 05 Dec 2013 Location: Wales Posts: 5109  
|
All I can say is WOW....
Brilliant is another word I would use… For those who like Welsh Mountains and narrow boats have a look at my videos and photos at.. http://www.youtube.com/user/conwy1 |
||
|
13th Nov 2015 12:53am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
