DEFENDER2.NET - View topic - Wobble / vibration through steering wheel at 50 to 55mph

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Wheels & Tyres > Wobble / vibration through steering wheel at 50 to 55mph

Page 1 of 1

Print this entire topic ·

peterl

Member Since: 08 Jan 2009
Location: Pembrokeshire
Posts: 308

Wobble / vibration through steering wheel at 50 to 55mph

Just fitted new wheels and tyres ( sawtooth with bfg 265-75-16 AT's) which were balanced by the supplier. I noticed a wobble/ vibration at about 50to 55 mph through the steering wheel. I then took them to a local tyre fitted and had them re balanced and he had to put a few more weights on,his machine gave the front tyres the green light and we were good to go.
The wobble is still there on some road surfaces at the same speed.
As a long shot, will get the rears done as well, has anyone experienced a similar problem and is there anything else I can try to eliminate the issue ?
The Landy has only covered 600 miles, so I don't think it would be bearings or dampers( problem did not exist with factory steels on).

30th May 2015 4:51pm

Litch

Member Since: 10 Mar 2013
Location: Oxfordshire
Posts: 765

Experiencing EXACTLY the same thing at the moment.

Been running 265/75x16 BFG's on ZU's for years without any problems whatsoever. Fitted 265/75x16 ST Maxx on Sawtooth's and I also have a wobble at 50-55MPH. Tyres are balanced ok and there are no problems at higher or lower speeds but I get the wobble at this speed regardless of the road surface.
I am going to check the swivel pre-loads but it is a brand-new LRGP axle and was fine with the old wheels / tyres fitted. ONE LIFE, GET IT!

30th May 2015 5:23pm

JWL

Member Since: 26 Oct 2011
Location: Hereford
Posts: 3443

Worth checking the suspension bushes, mainly the Panhard arm and Radius arm bushes. Get a good pry bar and check for movement.

30th May 2015 8:39pm

Lambley

Member Since: 20 Apr 2013
Location: Mid Devon
Posts: 1435

are both of the new sets of wheels the 'copies' by any chance?

30th May 2015 9:48pm

peterl

Member Since: 08 Jan 2009
Location: Pembrokeshire
Posts: 308

Mine are.
Another long shot is, I have locking wheel nuts, could these throw the balance out if they are a different weight to the standard nuts?

31st May 2015 6:39am

williamthedog

Member Since: 29 Dec 2012
Location: south wales
Posts: 3441

i got sawtooth with bfg all terrains ,mine are spot on.
i had that problem with bfg mud terrains though

31st May 2015 6:56am

peterl

Member Since: 08 Jan 2009
Location: Pembrokeshire
Posts: 308

Williamthedog, are your sawtooths aftermarket and what pressures are you running?

31st May 2015 7:05am

williamthedog

Member Since: 29 Dec 2012
Location: south wales
Posts: 3441

yes mine are copies.
i run them at 33psi, but i have got rack and rooftent fitted.
no wobble at any speeds ,the mud terrains would go out of balance all the time.
saved them for winter use and lower speeds

31st May 2015 7:34am

peterl

Member Since: 08 Jan 2009
Location: Pembrokeshire
Posts: 308

Cheers for that, next stage is to balance the rear ones again and swap them over to see if that helps.

31st May 2015 7:42am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum