DEFENDER2.NET - View topic - Replacing vent flap cables

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > Replacing vent flap cables

Page 1 of 1

Print this entire topic ·

excossack

Member Since: 22 Feb 2012
Location: North West
Posts: 5843

1999 Defender 110 Td5 SW Caledonian Blue

Replacing vent flap cables

The cable that operates the windscreen vent and footwell vent was jamming, so had a look at the levers and while adjusting the cable snapped about 10-15mm off the end.
So at the mo, I have air to the windscreen and air to the drivers side footwell, the passengers how ever very little.

So, looking at it, It looks like a PITA to replaced the cable - is my assumption correct? Dash board in bits job?

Are the foot well flaps operated by a rod linking the pair together with the cable connected at one end? 1999 Defender TD5 110

Regards
John M0VAZ
Econet Station 48 no clock

30th Jan 2015 9:37pm

GREENI

Member Since: 22 Aug 2010
Location: staffs
Posts: 10380

Having just stripped a dash to replace a bulkhead, I'm sure (without going in the garage to verify) that that cable goes into the lower part of the dash, when I took it off, I actually thought 'that looks a bit tricky to replace!

I'm about to go out for the morning, though I'd be happy to take pics of the dash and or see if there's a 'cheat' way of doing it.

31st Jan 2015 8:44am

excossack

Member Since: 22 Feb 2012
Location: North West
Posts: 5843

Pics as always would be nice - thanks 1999 Defender TD5 110

Regards
John M0VAZ
Econet Station 48 no clock

31st Jan 2015 8:49am

GREENI

Member Since: 22 Aug 2010
Location: staffs
Posts: 10380

Aww crap. I've only just sat down... I'll dig it out tomorrow. Totally busy and forgot.

sorry.

31st Jan 2015 7:13pm

excossack

Member Since: 22 Feb 2012
Location: North West
Posts: 5843

Ahhhhhhhhhh no matter. 1999 Defender TD5 110

Regards
John M0VAZ
Econet Station 48 no clock

31st Jan 2015 7:15pm

GREENI

Member Since: 22 Aug 2010
Location: staffs
Posts: 10380

Watch this space, will jump in the garage in a bit

31st Jan 2015 7:45pm

GREENI

Member Since: 22 Aug 2010
Location: staffs
Posts: 10380

Right then, not gonna kid you, it's a bit of a big job. Either put a day aside to strip the dash entirely, or the easy option... go down your local bike shop and ask them for an off-cut of an inner brake or gear cable and attach it to the bit that you have at the lever end, I'd use a very small block connector...or solder it (as you're a 'Ham'

)

If you need pics of the dash/flap end, let me have an email and I'll send you them.

31st Jan 2015 8:53pm

excossack

Member Since: 22 Feb 2012
Location: North West
Posts: 5843

Thanks. I think it will be a fix job as the flaps dont appear to be operating as they should, they flaps appear stiff...
At the mo, I think the passenger side one is partly open and the drivers side open more.

Will PM email address over in a mo and yup,I am a ham (2E0DHN) 1999 Defender TD5 110

Regards
John M0VAZ
Econet Station 48 no clock

1st Feb 2015 9:46am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum