megatoad
Member Since: 07 Jan 2012
Location: Hertfordshire
Posts: 358
 
|
| Handbrake Lever not dropping fully by itself | |
Hi All
I recently have found that when I release the handbrake the lever does not pull down fully leaving the warning light illuminated until I physicaly push the lever down the last two inches.
Motor in question is a 2006 110
It is possibe that the shoes are nearly worn out, not that I have any probem with the brake itself (though I have pulled of in bottom box recently with the handbrake applied whilt towing swambos 88 project).
I am just wondering whether there is some sort of return spring like on the old series that may have failed.
Anyone got any clues what to look for?
That said busy weekend coming up as I have to replace rear disks and calipers on swambos D1, then RTV at Sewell in the 80  He who dies with the most toys wins 
Defender 90 & 110, S1 80", Disco 1, S111 88
LRSOC & CVLRC
|
13th Nov 2014 9:57pm |
|
