DEFENDER2.NET - View topic

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > Pilot learn?

Page 1 of 1

Print this entire topic ·

mk1collector

Member Since: 17 Sep 2009
Location: West Yorkshire
Posts: 6772

Pilot learn?

I've read about the pilot learn which can be done on tdci defenders which has had some success in making noisy injectors quieter and making the engine smoother. My question is, is the pilot learn something that can also be done on a td5 or is it tdci specific? The reason for my question is I have a vibration that has started recently and sometimes it's barely noticeable and the engine feels smoother but other times is quite bad and the engine feels to be running rough (although the engine pulls really well all the time) so, as I've fitted a new MAF and a new dmf recently (dmf last year), I can't decide if it's a drive train problem or engine problem

22nd Sep 2014 11:31am

diesel_jim

Member Since: 13 Oct 2008
Location: hiding
Posts: 6127

Tdci specific.... although each Td5 injector has its own code that needs to be entered into the ECU to run at its best.
But unless your ECU or injectors or engine have been changed, then this shouldn't have been altered.

Last edited by diesel_jim on 22nd Sep 2014 7:13pm. Edited 1 time in total

22nd Sep 2014 5:57pm

mk1collector

Member Since: 17 Sep 2009
Location: West Yorkshire
Posts: 6772

poo, ah well onto the next idea.

thanks for the info

22nd Sep 2014 6:46pm

grafty99

Member Since: 15 Aug 2012
Location: North Devon
Posts: 4795

Oil in loom? 2002 90 Td5 Station Wagon
1990 Vogue SE
Triumph Tiger Explorer 1200
Td5 90 Thread http://www.defender2.net/forum/topic50767.html
Tdi 110 Thread https://www.defender2.net/forum/topic69562.html
RRC Thread http://www.defender2.net/forum/topic54492.html
Instagram http://www.instagram.com/george_grafton

23rd Sep 2014 9:54pm

mk1collector

Member Since: 17 Sep 2009
Location: West Yorkshire
Posts: 6772

Unfortunately not as I've changed the loom to try and sort the problem

I think it must be the year old dmf on its way out as the engine pulls really well. I'm going to see if it gets worse and if so refurb the gearbox and do the clutch slave cylinder while the dmf and clutch are getting done again.

23rd Sep 2014 10:01pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum