 | Home > Puma (Tdci) > Centre dash removal/extra switches |
 
|
|
|
| ponamore Member Since: 15 Nov 2009 Location: ludlow Posts: 44   
|
hi, two screws then pull or gently prize from bottom, had mine out several times.
good luck. |
||
19th Apr 2010 6:32pm |
|
| Cibit Member Since: 26 Oct 2009 Location: Northumberland Posts: 424 
|
Brendan what do you need the switch for? So what if it says rear heater as long as it works
I am going for carling switches for what I need. Lights and possibly air lockers in the future. If your taking the dash out anyway they can be a neat option. http://www.mudstuff.co.uk/Carling_Switches.shtml Hope this helps Simon  59 2.4 110 XS Utility
55 TD5 110 CSW Special Vehicle |
||
|
19th Apr 2010 6:42pm |
|
| big steve Member Since: 24 Dec 2009 Location: hertfordshire Posts: 2456 
|
iv gt 6 carling switches in the flat panel next to the steering wheel in banks o3 above each over looks really good but be warned the plastic isnt easy to cut theres stiffening bits behind it aswell?
steve 2015 2.2 tdci hardtop xs 3.2 conversion DONE 238bhp and 707nm torque and thats just the start ;-P hybrid turbo in build -done ready to fit ashcroft atb in transfer box 6 speed auto in build |
||
|
19th Apr 2010 7:16pm |
|
| leeds Member Since: 28 Dec 2009 Location: West Yorkshire Posts: 8580
|
|||
|
19th Apr 2010 7:18pm |
|
| Cibit Member Since: 26 Oct 2009 Location: Northumberland Posts: 424
|
Steve can you post a pic mate?
Brendan you would use the carling switches located where steve has his. Not as a replacement part. They have their own holders. 59 2.4 110 XS Utility 55 TD5 110 CSW Special Vehicle |
||
|
19th Apr 2010 7:27pm |
|
| big steve Member Since: 24 Dec 2009 Location: hertfordshire Posts: 2456
|
ill take one tomorow and put it up if i can work out how too 2015 2.2 tdci hardtop xs
3.2 conversion DONE 238bhp and 707nm torque and thats just the start ;-P hybrid turbo in build -done ready to fit ashcroft atb in transfer box 6 speed auto in build |
||
|
19th Apr 2010 7:46pm |
|
| willy eckerslike Member Since: 15 Jun 2009 Location: North yorks Posts: 1789 
|
 Click image to enlarge Courtesy of Sonic3d gallery Original Member Pie n Pea Club. 110 HCPU Tipper |
||
|
19th Apr 2010 8:00pm |
|
| big steve Member Since: 24 Dec 2009 Location: hertfordshire Posts: 2456
|
ok iv taken them now im guna put 3 more below for winches ?
ok and how do u upload the pics 2015 2.2 tdci hardtop xs 3.2 conversion DONE 238bhp and 707nm torque and thats just the start ;-P hybrid turbo in build -done ready to fit ashcroft atb in transfer box 6 speed auto in build |
||
|
19th Apr 2010 8:02pm |
|
| fekete Member Since: 24 Dec 2008 Location: Here on the other end of the computer Posts: 3626 
|
Here Steve
http://www.defender2.net/forum/topic124.html NEVER TAKE LIFE SERIOUSLY. NOBODY GETS OUT ALIVE ANYWAY |
||
|
19th Apr 2010 8:10pm |
|
| Cibit Member Since: 26 Oct 2009 Location: Northumberland Posts: 424
|
Pete did you cut the slots for the switches yourself. If so do you need to remove the centre console?
Ta mate 59 2.4 110 XS Utility 55 TD5 110 CSW Special Vehicle |
||
|
21st Apr 2010 1:17pm |
|
| leeds Member Since: 28 Dec 2009 Location: West Yorkshire Posts: 8580
|
Have got some switches now to use the spare spaces on the console. Using 4 of the 5 spaces. Fitting twin Light Force 170 lights at bumper bar and 4 Light Froce 140 lights at roof level. All switched in pairs. Then mounting twin LED worklights to the rear. Was wondering if had room on the side panels for switches now I know the answer 
Today we have fitted a Longline drawer and a 110 litre replacement tank. Not enough time to fit the 45 littre wing tank. Our 110 Ute is progressing 
Brendan |
||
|
21st Apr 2010 6:40pm |
|
| discocuzzy Member Since: 16 Jul 2008 Location: surrey Posts: 1200 
|
Get some pics up Brendan
You cannot teach stupid people to do clever things |
||
|
21st Apr 2010 9:57pm |
|
| leeds Member Since: 28 Dec 2009 Location: West Yorkshire Posts: 8580
|
Will do. Also will keep a blog on our website. The black 110 Ute is being prepped as an overland vehicle as we know our red 110 will need a serious rebuild in a couple of years as it has seen some hard miles. Life is a bit hectic at moment on the personal side and business side. Front steering guard fitted on Monday Click image to enlarge Back of 110 at beginning of week Click image to enlarge Old and new tank Click image to enlarge Wheel carrier and rear receiver Click image to enlarge Had to modify this rear strut in preparation of new wing tank Click image to enlarge Fuel cooler guard. Click image to enlarge Tomorrow hopefully will complete fitting wing tank and then start on the electricals. Brendan Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated  |
||
|
21st Apr 2010 10:32pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
