 | Home > Maintenance & Modifications > JW8700 install help |
 
|
|
|
| Go Beyond Member Since: 30 Jan 2012 Location: Headcorn, Kent Posts: 6678  
|
If your Speaker headlights have a 'marker' lamp there should be a single cable coming out of the back of the headlight with (from memory) a male spade terminal.
DONT cut that plug off and crimp the two wires together, that will create a dead short |
||
23rd May 2013 4:50pm |
|
| a13x Member Since: 25 Sep 2011 Location: Burton on Trent Posts: 553
|
That's correct, however the 2 connectors for the headlight are what's seen in the pic above, 1 3 pin (black) and the other (white and yellow connector) for the sidelight bulb.
|
||
|
23rd May 2013 4:56pm |
|
| Go Beyond Member Since: 30 Jan 2012 Location: Headcorn, Kent Posts: 6678
|
OK, so the positive cable on the two pin plug goes to the single cable on the headlight, the other is an earth which is not required
|
||
|
23rd May 2013 4:57pm |
|
| dgardel Member Since: 30 Nov 2008 Location: Veneto (Heart & Head) Posts: 3586 
|
With a multimeter che the positive (+12V) when the side/marker is ON Connect the single cable from the JWS to this one  Click image to enlarge take a look HERE Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated  Discovery 5 td6 HSE Stornoway Gray Outback Engineering Limited Edition
IID Pro MV License |
||
|
23rd May 2013 7:25pm |
|
| adafish Member Since: 30 Mar 2009 Location: atherstone Posts: 1385 
|
if you have the 8700 evo with side marker lights and the 70mm drl's , you can also wire the marker to do sme has DRL's ask Tim.... Putting Dreams on Drives at JLR Solihull..
|
||
|
24th May 2013 4:05pm |
|
| Porny Site Sponsor Member Since: 31 Aug 2009 Location: Sutton Coldfield - West Midlands Posts: 810 
|
Or....
If you get stuck have a quick drive down the A38 an I can make a suitable harness 
Ian IRB The home of the first modified Keswick Green 90 - and the first 2.4 Puma through both the 200bhp and 550Nm barriers. www.IRBdevelopments.com www.facebook.com/irbdevelopments www.integrated316.com www.facebook.com/integrated316 |
||
|
24th May 2013 6:20pm |
|
| a13x Member Since: 25 Sep 2011 Location: Burton on Trent Posts: 553
|
May take you up on that, I will soon have a good bit of wiring to do. Carling switches to hook up and run cables for future upgrades.
|
||
|
24th May 2013 6:41pm |
|
| adafish Member Since: 30 Mar 2009 Location: atherstone Posts: 1385
|
........thanks, might take you up on that, any biscuits ?...need Derek's doing...  Putting Dreams on Drives at JLR Solihull.. |
||
|
24th May 2013 8:35pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
