↓ Advertise on Defender2 ↓

Home > Stolen > Attempted bike theft (Maxx Raxx)
Post Reply  Down to end
Page 1 of 2 12>
Print this entire topic · 
Lishlandy



Member Since: 26 Oct 2011
Location: High Wycombe
Posts: 941
England 2012 Defender 110 Puma 2.2 X-Tech LE Orkney Grey
Attempted bike theft (Maxx Raxx)
Good Day all,

Interesting day today, went to get a surprise new bike for the missus and got a little surpise of my own. Some son of a female dog has been getting handsy with my padlock on the Maxx Raxx. As you can see roughly in the pic below there is a horizontal hole in the padlock that has been drilled through, there is still swarf on the inside but they dont seem to have drilled the arm bit that clips in.





Click image to enlarge

2 questions.

1. Anyone else had anything like this happen and what measures did they take to prevent it happening again.

2. Do any of you know any quality small tamper proof padlocks that I can get hold of, I have had a look around the net and either find massive ones too big for the hole or cheap chinese ones made of cheese.

Any help would be greatly appreciated, they didnt get the bike this time but I will be travelling as per other thread with the bikes and want to avoid them having dirty theiving bums on them.

Regards ===================================
Steve
90 xs sw in Stonoway Grey - Sold
110 USW X-TECH
Post #227447 15th Apr 2013 12:33pm
View user's profile Send private message View poster's gallery Reply with quote
JeremyJ



Member Since: 16 Nov 2011
Location: Aylesbury
Posts: 1758
United Kingdom 
Unreal Evil or Very Mad

Where abouts did that happen?
Post #227449 15th Apr 2013 12:47pm
View user's profile Send private message View poster's gallery Reply with quote
Lishlandy



Member Since: 26 Oct 2011
Location: High Wycombe
Posts: 941
England 2012 Defender 110 Puma 2.2 X-Tech LE Orkney Grey
The only place the bikes have been left on for any time is Black Park over near Iver Heath.

We have a bike ride with the dogs, then a walk around the lake to throw the ball etc so could only have been with that hour or so that we do that and leave the bikes on the rack in the car park.

Very worrying that they came so close Big Cry ===================================
Steve
90 xs sw in Stonoway Grey - Sold
110 USW X-TECH
Post #227454 15th Apr 2013 1:02pm
View user's profile Send private message View poster's gallery Reply with quote
farmer giles



Member Since: 09 Feb 2011
Location: worcestershire
Posts: 1299
2011 Defender 110 Puma 2.4 SW Cairns Blue
have a look at atomic 22 website; a seat binder bolt in lieu of the padlock may be an alternative solution if the diameters are the same?
Post #227459 15th Apr 2013 1:39pm
View user's profile Send private message View poster's gallery Reply with quote
GREENI



Member Since: 22 Aug 2010
Location: staffs
Posts: 10381
United Kingdom 
You can't leave anything anywhere nowadays Evil or Very Mad
Post #227560 15th Apr 2013 6:52pm
View user's profile Send private message View poster's gallery Reply with quote
party monkey



Member Since: 31 Dec 2010
Location: Oxon.
Posts: 1311
England 2005 Defender 110 Td5 XS CSW Cairns Blue
There's always the permanent live feed behind OS rear speaker Twisted Evil

I'm told Abloy padlocks are pretty tough against bolt cutters but not sure about the body of the lock itself. They are typically S/Steel though, so to my mind, should be tougher than brass but a quick google suggests they're not cheap either. Jon - 110 td5 [sold]. Currently Defenderless.
Post #227623 15th Apr 2013 8:32pm
View user's profile Send private message View poster's gallery Reply with quote
appaloosadude



Member Since: 17 Oct 2012
Location: Buckinghamshire
Posts: 630
United Kingdom 2003 Defender 110 Td5 DCPU Havana
Lishlandy wrote:
.... near Iver Heath.


Pikeys, most likely.
Post #227692 15th Apr 2013 11:49pm
View user's profile Send private message View poster's gallery Reply with quote
RFT



Member Since: 13 Nov 2010
Location: Cheshire
Posts: 678
United Kingdom 2010 Defender 130 Puma 2.4 HCPU Zermatt Silver
Most brass padlocks have a brass plug in that location, it is the route by which the lock pin is assembled. The plug may just have rattled out under vibration if poorly built, hence leaving some swarf type of debris. I don't think anyone would faff about with a drill on a brass padlock, one or two simple twots with a hammer whilst jamming it in place with a small pry bar would have seen it in pieces on the floor. 130 Puma HCPU with an Artica 240LR Demountable Camper
Post #227694 16th Apr 2013 1:31am
View user's profile Send private message View poster's gallery Reply with quote
ken



Member Since: 18 Aug 2009
Location: Banging Birds with my bitches !!
Posts: 4328
United Kingdom 
Poor BLR might be a bit worried as our Transit / Tintent friends have taken up residance next door Shocked
Post #227697 16th Apr 2013 4:59am
View user's profile Send private message View poster's gallery Reply with quote
JeremyJ



Member Since: 16 Nov 2011
Location: Aylesbury
Posts: 1758
United Kingdom 
Next to their new site?
Post #227698 16th Apr 2013 5:11am
View user's profile Send private message View poster's gallery Reply with quote
Lishlandy



Member Since: 26 Oct 2011
Location: High Wycombe
Posts: 941
England 2012 Defender 110 Puma 2.2 X-Tech LE Orkney Grey
They get everywhere! Well the scum definitely drilled it but didn't get the whole way through. Nothing stolen but next time I might not be so lucky.

At least forte du Ken is safe....I'm sure I've seen lasers Shocked

Thanks for all the suggestions, my Maxx Raxx now feels violated and I will be getting an anti tamper one shortly, one I find one small enough. The Atomic 22 site looks great but I'd have to carry a tool round with me each time I'd want to use the rack. Suppose I could stick it in with the puncture repair kit. Still need to measure the diameter for fitting before I go for it. ===================================
Steve
90 xs sw in Stonoway Grey - Sold
110 USW X-TECH
Post #227712 16th Apr 2013 6:54am
View user's profile Send private message View poster's gallery Reply with quote
ken



Member Since: 18 Aug 2009
Location: Banging Birds with my bitches !!
Posts: 4328
United Kingdom 
Jeremy wrote:
Next to their new site?


Fraid so
Post #227837 16th Apr 2013 3:17pm
View user's profile Send private message View poster's gallery Reply with quote
XS Pete



Member Since: 13 Jan 2011
Location: Suffolk
Posts: 632
England 2011 Defender 90 Puma 2.4 XS CSW Stornoway Grey
Quote:
Most brass padlocks have a brass plug in that location, it is the route by which the lock pin is assembled. The plug may just have rattled out under vibration if poorly built, hence leaving some swarf type of debris. I don't think anyone would faff about with a drill on a brass padlock, one or two simple twots with a hammer whilst jamming it in place with a small pry bar would have seen it in pieces on the floor.
Thumbs Up

I had one do exactly the same as that in exactly the same place last time it got down below freezing a couple of weeks ago. I went out to unlock one of the sheds and spotted exactly the same hole in the lock. The lock was covered in ice and the little brass plug was laying on the ground below it. It looked like water had got in, frozen, and forced the plug out. I simply wacked it back in with a copper mallet.

As RFT said above, the plug has probably just fallen out.

Pete
Post #227984 16th Apr 2013 10:00pm
View user's profile Send private message View poster's gallery Reply with quote
Lishlandy



Member Since: 26 Oct 2011
Location: High Wycombe
Posts: 941
England 2012 Defender 110 Puma 2.2 X-Tech LE Orkney Grey
So know one has been getting handset with my padlock! That's great news! It does make some sense now as otherwise I'm not sure how they would assemble the mechanism.

Still need to buy another padlock though Sad ===================================
Steve
90 xs sw in Stonoway Grey - Sold
110 USW X-TECH
Post #228014 17th Apr 2013 6:30am
View user's profile Send private message View poster's gallery Reply with quote
me@td5.org



Member Since: 16 Jan 2011
Location: Warwick
Posts: 856
2000 Defender 90 Td5 HT Epsom Green
It's Karma,

The value of bikes fastened to the vehicle should be greater than the vehicles worth. There are rules about these things. www.td5.org
Post #228027 17th Apr 2013 7:04am
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 1 of 2 12>
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums