DEFENDER2.NET - View topic - Blackvue PC Software needed

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Off Topic > Blackvue PC Software needed

Page 1 of 1

Print this entire topic ·

borderterrier

Member Since: 09 Dec 2011
Location: Surrey
Posts: 1677

2013 Defender 110 Puma 2.2 XS CSW Aintree Green

Blackvue PC Software needed

I have a Blackvue DR300G camera in my Defender. I have recently changed my PC and cannot locate the software for the PC to view the videos on the SD card. I can find the Blackvue HD software for Windows, but not the basic version. Was wondering if anyone had it on their PC and could email it to me, or failing that a link if one exists?

Thanks

Steve

27th Mar 2013 6:00pm

BarneyRubble

Member Since: 08 Mar 2010
Location: Naphill
Posts: 103

2010 Defender 90 Puma 2.4 HT Stornoway Grey

Don't know about the 300, but my 400 had the software loaded on the SD card. Barney

D4 - 2016 Graphite, Montalcino Red
Written Off - 2010 90 Hard Top, Stornoway Grey

27th Mar 2013 6:19pm

Laurie

Member Since: 22 Feb 2008
Location: Sussex, England
Posts: 2897

2005 Defender 90 Td5 XS CSW Bonatti Grey

Does the updated version not work with yours?

http://www.blackvue.com/en/contents/sub3.a...searchstr=

27th Mar 2013 6:20pm

borderterrier

Member Since: 09 Dec 2011
Location: Surrey
Posts: 1677

BarneyRubble wrote:
Don't know about the 300, but my 400 had the software loaded on the SD card.

Yea mine did too, but that was over 2 years ago and its been formatted several times since then!

27th Mar 2013 6:20pm

borderterrier

Member Since: 09 Dec 2011
Location: Surrey
Posts: 1677

Laurie wrote:
Does the updated version not work with yours?

http://www.blackvue.com/en/contents/sub3.a...searchstr=

No, its for the HD version, tried that already.

27th Mar 2013 6:21pm

BarneyRubble

Member Since: 08 Mar 2010
Location: Naphill
Posts: 103

I thought that if you formatted the sd card, when you next put it in the blackview, it re-loaded all the software.

Must admit, I've never tried it. Barney

D4 - 2016 Graphite, Montalcino Red
Written Off - 2010 90 Hard Top, Stornoway Grey

28th Mar 2013 8:18am

borderterrier

Member Since: 09 Dec 2011
Location: Surrey
Posts: 1677

The firmware to operate the camera is located on the SD card. The PC software is used to set it up. Once you insert the SD card it works off those settings. I need the PC software to so it though!

28th Mar 2013 8:58am

Martin
Site Admin

Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6604

2015 Defender 90 Puma 2.2 XS CSW Montalcino Red

Unless you've got an odd/clone BlackVue, BarneyRubble is right - if you put a blank SD card in a BlackVue then when it's powered up the camera will initialise the card and copy the viewer software etc to the SD card.

You do indeed carry out firmware updates via the SD card, but the actual firmware the camera uses is stored on the BV camera.

I have a 300G and swap cards over without having to load anything onto each card first, and the software appears on the card after the initalisation

Give it a try

1988 90 Td5 NAS soft top

2015 D90 XS SW

28th Mar 2013 9:27am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum