↓ Advertise on Defender2 ↓

Home > Maintenance & Modifications > Where to find a Steering Guard for Defender 07-
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Guitarplayer



Member Since: 09 Nov 2009
Location: Akersberga
Posts: 18

Sweden 2007 Defender 110 Puma 2.4 XS CSW Java Black
Where to find a Steering Guard for Defender 07-
Hi
Anybody that can give me a recommendation of wich Steering Guard i should go for and where to find it?
Steel or Alloy?
I want a Bolt on application and i think it would be good to have ventilation holes?
I have a Defender 110 StationWagon from 2007

What do you guys have on your rigs?
Post #18254 12th Nov 2009 9:31pm
View user's profile Send private message View poster's gallery Reply with quote
jst



Member Since: 14 Jan 2008
Location: Taunton
Posts: 8026

 2011 Defender 110 Puma 2.4 USW Stornoway Grey
you normally find them between the chassis rails at the front of the vehicle....

not helping......

my thoughts - ditch the holes its a guard for a purpose, why risk logs, corners of stones, muck etc being pushed through.

I have only ever fitted Southdown kit to my vehicles, my Puma has one Daves steering, front axle and detachable towing kits on it plus a rear diff guard still waiting to be fitted.

they cost more than some but you only need to buy once.

they are bolt on Cheers

James
110 2012 XS Utility
130 2011 M57 bespoke Camper
90 2010 Hardtop
90 M57 1988 Hardtop
Post #18256 12th Nov 2009 9:41pm
View user's profile Send private message View poster's gallery Reply with quote
Mad Cow



Member Since: 27 Oct 2009
Location: Hertfordshire
Posts: 292

England 2007 Defender 90 Puma 2.4 HT Zermatt Silver
mine's a Rebel 4x4 model.

Full details and pictures in this thread http://www.defender2.net/forum/topic1994.html MAD COW

2007 90 Hard Top - 2009 BMW F800GS - 2002 CCM 604E Dual Sport

Project90
Post #18259 12th Nov 2009 9:49pm
View user's profile Send private message View poster's gallery Reply with quote
fekete



Member Since: 24 Dec 2008
Location: Here on the other end of the computer
Posts: 3626

United Kingdom 2007 Defender 90 Puma 2.4 HT Bonatti Grey
Try these guys
http://www.devon4x4.com/products_a/c20/protection.html NEVER TAKE LIFE SERIOUSLY. NOBODY GETS OUT ALIVE ANYWAY
Post #18260 12th Nov 2009 9:54pm
View user's profile Send private message View poster's gallery Reply with quote
Guitarplayer



Member Since: 09 Nov 2009
Location: Akersberga
Posts: 18

Sweden 2007 Defender 110 Puma 2.4 XS CSW Java Black
jst wrote:
you normally find them between the chassis rails at the front of the vehicle....

not helping......



Thanks for the input, but i'm not going to steal it Wink Wink

The Rebel seems to do the job so i will go for that

Thanks! Land Rover Defender 110 SX Station Wagon 2007
Post #18271 13th Nov 2009 7:54am
View user's profile Send private message View poster's gallery Reply with quote
alantd



Member Since: 14 Dec 2008
Location: Northamptonshire
Posts: 1513

United Kingdom 2007 Defender 110 Puma 2.4 XS CSW Tonga Green
Holes vs no holes. As with most aftermarket kit, people'll tell you different things (based on what they bought Wink ).

Holes = drainage (supposedly) and lighter weight (like that really matters). If you're being pulled backwards out of a bog, a guard with no holes will act as an effective ground anchor. Holes will help VERY slightly (but not much). A lot of people avoid both and fit Dan guards over the linkage for that reason.

No holes will allow you to 'skid' over items with slightly less friction.

Unless you're doing serious challenge work (which I guess you're not) then I doubt there's any substantial difference in reality. Holes are slightly easier to jet wash Very Happy

No real difference between alloy and steel. Alloy is generally lighter but you need a thicker guard so benefit is marginal.

The main advice I'd give is get one with front recovery points built in and decide now whether you're going to fit a winch or not.
For what it's worth, I have an alloy one with holes and front recovery points and no winch.

These guys are good Firstfour.co.uk One that started out as a 2.4 TDCi 110 XS
+ New Defender 110 First Edition
Post #18278 13th Nov 2009 10:20am
View user's profile Send private message View poster's gallery Reply with quote
Guitarplayer



Member Since: 09 Nov 2009
Location: Akersberga
Posts: 18

Sweden 2007 Defender 110 Puma 2.4 XS CSW Java Black
Thanks, and you're right i will not do any heavy offroading (been there done that), but i wan't some protection just in case, and of course just for the look Very Happy Very Happy

I found that Allmakes and Britparts Steering Guards is available in Sweden so maybe i will shoose one of those (but the price is twice as to buy it self from UK). I think the Allmakes looks better because it has more holes
Very Happy Land Rover Defender 110 SX Station Wagon 2007
Post #18284 13th Nov 2009 10:42am
View user's profile Send private message View poster's gallery Reply with quote
mse



Member Since: 06 Apr 2008
Location: UK
Posts: 5035

United Kingdom 2016 Defender 110 Puma 2.2 XS CSW Scotia Grey
A note on them and (at least) genuine winch bumpers - the advice on that is true - i didnt want/couldnt have recovery eyes because my winch bumper has the front recovery points on it.

Not the tollerance might have allowed them to pass but both bumper and guard holes would have been obscured. Mike
Post #18314 13th Nov 2009 5:12pm
View user's profile Send private message View poster's gallery Reply with quote
TJ101



Member Since: 30 May 2007
Location: Taunton Somerset
Posts: 3750

Isle Of Man 2015 Defender 110 Puma 2.2 XS CSW Montalcino Red
I used a genuine LR solid alloy steering guard, with the inbuilt reinforcing bar behind it, non recovery eye type, as they would foul the in built points on the winch bumper

Southdown front axle guard, and OEC rear diff guard,,, so far so good,, All bar the rear diff, came off previous Defenders inc TD5 California F1, 75th 110 "Kermit", 50th Ann V8, 90 V8 Hybrid, 55 Series 1

Main Brian James Trailer Dealer for South West UK
Post #18330 13th Nov 2009 11:15pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums