DEFENDER2.NET - View topic - Top tip: Measure your bolts!!!

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Top tip: Measure your bolts!!!

Page 1 of 1

Print this entire topic ·

diesel_jim

Member Since: 13 Oct 2008
Location: hiding
Posts: 6092

Top tip: Measure your bolts!!!

I decided to change the steering guards over on the project90 and the 110

110 had a southdown type, 90 had a proper mantec dural one, which lookd better so I thought i'd stick it on the 110, and put my scabby southdown one onto the 90 (as it's more of a scabby vehicle

)

Southdown onto 90, all well and good. 90 doesn't have an engine or radiator in it at the moment.

fitted the mantec one onto the 110, which uses 3 bolts per side, thus:

Click image to enlarge

The southdown doesn't use the top bolt.

my 110 has a galvanised chassis. so this top bolt hole had never been used, and so was slightly tight fitting for the bolt.
No problem, tickle it in with the hammer. the bolt I was using was about 3/4" too long, but I could pack it out with some washers on the inside. no problem.

So i whacked it in only to be met by the sound of pouring liquid, and all my antifreeze draining down the drive.

Because of:

Click image to enlarge

The bolt hole lines up exactly with the edge of the radiator... and it didn't like being hit with a bolt.

So cue one rapid strip down, radiator out and intercooler out to fit a new one. luckily I had a new rad on the shelf in the garage, but still a PITA!

16th Jun 2012 6:53pm

T1G UP

Member Since: 08 Dec 2009
Location: Bath
Posts: 3101

2011 Defender 110 Puma 2.4 XS CSW Orkney Grey

lucky you had a spare!

i got a mantec dural one for the 110...must fit it one day....using the right bolts

16th Jun 2012 7:30pm

diesel_jim

Member Since: 13 Oct 2008
Location: hiding
Posts: 6092

Its a nice guard. Just check the top bolts! I used the long one in the end but cut thje end off with the angle grinder.....easy when the rad and intercooler are out on the floor!

16th Jun 2012 8:19pm

MK

Member Since: 28 Aug 2008
Location: Santiago
Posts: 2414

2007 Defender 110 Puma 2.4 SW Chawton White

At least you know you have good tools

Puma 110" SW

.............................................................
Earth first. Other planets later

16th Jun 2012 8:21pm

bpman

Member Since: 21 May 2008
Location: Oslo
Posts: 8069

2008 Defender 110 Puma 2.4 SVX Station Wagon Santorini Black

Top tip Jamie -

17th Jun 2012 8:54pm

jst

Member Since: 14 Jan 2008
Location: Taunton
Posts: 8025

2011 Defender 110 Puma 2.4 USW Stornoway Grey

thats unlucky, glad you had a quick solution. Cheers

James
110 2012 XS Utility
130 2011 M57 bespoke Camper
90 2010 Hardtop
90 M57 1988 Hardtop

18th Jun 2012 8:19pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum