Home > Maintenance & Modifications > Sound deadening |
|
|
bob neville Member Since: 30 Apr 2009 Location: Marbella Posts: 3248 |
Following RRUK's lead and putting this in the back of the 90 before refitting the head lining.
http://www.ebay.co.uk/itm/Sound-noise-dead...3280251527 Probably use on the rear floor/arches etc as I replace the carpets. Bob 2015 Jaguar XE240 R Sport - goes like ....... !! 2013 Defender 90 CSW - sold 2009 Defender 110 Double Cab - sold 2001 TD5 90 CSW - offroad project - sold to a forum member 2011 Porsche Boxster - for the sunny days ! |
||
18th May 2012 8:27pm |
|
50H Member Since: 31 Mar 2012 Location: notts Posts: 27 |
That looks OK to go in the roof before the headlinings and I shall try it.
Also ordered some of this: http://www.ebay.co.uk/itm/130695122529?ssP...1438.l2649 which is 6mm thick for the wheel arches and rear floor. H. |
||
18th May 2012 8:39pm |
|
bob neville Member Since: 30 Apr 2009 Location: Marbella Posts: 3248 |
Thanks 50H - been looking for that sort of matting
Bob 2015 Jaguar XE240 R Sport - goes like ....... !! 2013 Defender 90 CSW - sold 2009 Defender 110 Double Cab - sold 2001 TD5 90 CSW - offroad project - sold to a forum member 2011 Porsche Boxster - for the sunny days ! |
||
18th May 2012 8:50pm |
|
Killer90 Site Sponsor Member Since: 09 Oct 2011 Location: Hertfordshire Posts: 6478 |
Click image to enlarge Click image to enlarge Click image to enlarge go the full hog mate stripped the old grey carpet out when i done me puma seat conversion then sealed everything off inside and sound proofed the lot including the whole front aswell now i have my van sides its even quieter still :thumbsup: Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated |
||
18th May 2012 8:57pm |
|
Nugget Member Since: 25 Apr 2012 Location: Perth Posts: 8 |
I’m in the process of doing my 110 in Dynamat Superlite, Dynaliner and Dynapad. I’m only half way through, cargo area complete from the windows down and from the rear door to the back seat foot well. I plan to finish off the floor all the way to the firewall, then the insides of the doors and then last but not least the roof. I’m not sure if I’m going to do under the bonnet yet?
I’ve been ordering the product from company call ‘12volt’ on eBay, out of the states. Mainly because of shipping costs. So far I’m happy with the results, but there’s still a fair old way to go before it’s done. 2008 110 SVX Defender The Black Truck |
||
19th May 2012 10:12am |
|
Romadog Member Since: 07 Jul 2011 Location: Powys Posts: 1749 |
I've been fitting this morning Dynamat Extreme to my 110's roof. Theres enough in a bulk pack (9sheets) to do front and rear sections of roof with some spare to start the middle section. If you have a 90 it will be enough with a little left over for other areas. I used the tape aswell, which tidies up the whole job. Bout mine from Car Audio in Oxfordshire. About to order more to finish centre section and do the Utility sides.
|
||
19th May 2012 2:34pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis