 | Home > My Defender > Gisby |
 
|
|
|
| MartinK Member Since: 02 Mar 2011 Location: Silverdale (Lancashire/Cumbria Border) Posts: 2665   
|
Unfortunate registration...Mr Gisby is apparently the owner of the "TOTALLY GAY PET SHOP":
Anyway, maybe I should sell him my registration plate:  Click image to enlarge Click image to enlarge Mr Gisby has replaced a 9-year-old Discovery 2 TD5 which I ran from new for 186,000 miles. I was told that I had bought one of the last of the 110 USW Orkney Grey 2.4 motors, before production migrated to the 2.2 power unit. Apparently 5 were built, and dispatched to dealers around the country, and I ended up having to drive from Scotland to Wales to collect this one. now almost 3 weeks old, and 1400 miles. Mods to date: 1. Full rustproofing, as helped by Zagato. Dinitrol and ACF-50 used in abundance. 2. Side Steps (it's a County, so they weren't standard...Thanks AndrewS), as SWMBO is only 5' 2". 3. Noisekiller - in rear tub, and under bonnet, a bit more to follow I think. 4. Tow bracket installed & replaced rear folding step with a tow-bracket mounted one. Tow bracket installed with stainless fasteners from Stig. 5. Early-life oil change - done Engine on Saturday, xfer, gearbox & diffs to follow. 6. Nakatanenga glove box (thanks Leeds) Next on the list is the reinforcement of the rear mudflap hangers. The Entreq ones looked pricey (or at least the carriage did!), I have obtained a piece of aluminium strip, which I'll cut, drill, and put inside the rim of the rear body panel. Also bought a few other bits, Defendoor (not fitted in photo) etc, and will test some 2-stroke in the fuel soon. Getting just under 28mpg so far... I'm loving it! 
Click image to enlarge Click image to enlarge Defender "Puma" 2.4 110 County Utility (possibly the last of the 2.4's) Last edited by MartinK on 6th Mar 2012 9:39am. Edited 1 time in total |
||
17th Oct 2011 8:47am |
|
| LR90XS2011 Member Since: 05 Apr 2011 Location: bickenhill Posts: 3641 
|
looking good DEFENDER 90 TDCI XS,
I hope everyone is well and your land rovers make you happy |
||
|
18th Oct 2011 6:54pm |
|
| MartinK Member Since: 02 Mar 2011 Location: Silverdale (Lancashire/Cumbria Border) Posts: 2665
|
Mr Gisby got a new playmate at the weekend...a "Freelander in a Fur Coat"...
MrsK collected her new Evoque. Really pleased so far...lovely interior, a great place to enjoy the miles. With all the gadgets (bings, bleeps etc) though, I was pleased to be back in the Defender Defender "Puma" 2.4 110 County Utility (possibly the last of the 2.4's) |
||
|
5th Mar 2012 12:09pm |
|
| MartinK Member Since: 02 Mar 2011 Location: Silverdale (Lancashire/Cumbria Border) Posts: 2665
|
Defender Mods to date:
1. Full rustproofing, as helped by Zagato. Dinitrol and ACF-50 used in abundance. 2. Side Steps (it's a County, so they weren't standard...Thanks AndrewS), as SWMBO is only 5' 2". 3. Noisekiller - in rear tub, and under bonnet, a bit more to follow I think. 4. Tow bracket installed & replaced rear folding step with a tow-bracket mounted one. Tow bracket installed with stainless fasteners from Stig. 5. Early-life oil change - done Engine on Saturday, xfer, gearbox & diffs to follow. 6. Nakatanenga glove box (thanks Leeds) 7. Safari Equip Bumperettes 8. TempCheck guage 9. Stainless Fastener Kit from Stig (not fitted yet) 10. Headlamp Bulbs (Philips Extreme) 11. Reinforced Rear Mudflap Hangars (DIY job with Aluminium Plate) 12. TGE Side Panels Defender "Puma" 2.4 110 County Utility (possibly the last of the 2.4's) |
||
|
5th Mar 2012 12:13pm |
|
| Zagato Site Supporter Member Since: 08 Jan 2011 Location: Billingshurst West Sussex Posts: 5013
|
A very striking combo for the driveway
|
||
|
5th Mar 2012 12:55pm |
|
| Moggy Member Since: 02 Oct 2011 Location: Suffolk Posts: 83 
|
I wanted to fit my NAS step/tow bar with stainless bolts but was advised against it for strength reasons unless you have found some high strength ss bolts ???? Mog 61 plate-110 USW......a bit pimped 54 plate NAS Spec 90-sold 4-Defenders-sold |
||
|
5th Mar 2012 6:20pm |
|
| MartinK Member Since: 02 Mar 2011 Location: Silverdale (Lancashire/Cumbria Border) Posts: 2665
|
I used the kit from Stig http://www.a2stainless.co.uk/Land-Rover-De....aspx?nh=1 I did assume that this was "fit for purpose". However a couple of other friends from the Forum (incl Dean Watson & Cobs) have mailed me with this very same concern. My trailer is only 750kg, although I have in the past borrowed a 2-tonne. Based on these concerns, I may put the originals back in if I intend towing a heavy load Defender "Puma" 2.4 110 County Utility (possibly the last of the 2.4's) |
||
|
6th Mar 2012 9:36am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
