DEFENDER2.NET - View topic - Adwest 4 bolt steering box overhaul

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Adwest 4 bolt steering box overhaul

Page 4 of 4

Print this entire topic ·

BrickBox

Member Since: 05 Oct 2021
Location: Wales
Posts: 894

2008 Defender 110 Puma 2.4 USW Zermatt Silver

?si=N3btfMP3_FXmRKGP

?si=aahUP7xOsXaso4qE

?si=Glb8x1miESj8A3_i

?si=_aGW05ZfTQcjeGSl 2008 2.4 110 Utility Station Wagon XS.

4th Mar 2025 9:17am

revd

Member Since: 20 Apr 2024
Location: England
Posts: 205

There is an interesting story as to what happened to the Adwest factory after it was sold as a going concern, long story short, the factory was closed for some time due to an ownership dispute and by the time it was resolved the factory had been broken into and everything, tooling, plant, machinery stolen by scrap metal thieves, even the sub-station, sadly all drawings were lost too.

4th Mar 2025 12:32pm

olistr

Member Since: 29 Dec 2022
Location: BW
Posts: 68

snap ring stuck hard

hi
thx, I have seen all videos from britrest

that snap-ring he is removing is peanuts.
I am hammering already much more and it is not moving.
next plan is to sandblast that section, although I don't think it will help.

then I might try to soak that part in evaporust, this shouldn't damage any interior part in case some evaporust would be able to get to the inside.

If all things fail, I have seen that a good Torch worker, could cut it without too much damage.

5th Mar 2025 6:47am

Page 4 of 4

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum