DEFENDER2.NET - View topic - Sleeping solution with 4 seats

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Camping, Caravanning and Holidays > Sleeping solution with 4 seats - Ideas?

Page 1 of 1

Print this entire topic ·

blackbeast

Member Since: 21 Mar 2024
Location: Lucerne
Posts: 4

Sleeping solution with 4 seats - Ideas?

Hello everyone,

I'm looking for a sleeping solution for my 110 TD4 that allows me to use the rear row of seats in full (I need a total of 4 seats).
Is there anyone who has a CAD drawing available or could draw one?

Or is there perhaps a ready-made system that can be installed?

It should be a foldable solution.

Currently, I have an Oryx built-in cabinet on the left and a wheel arch box on the right, but I could take them out for a new system.

Thanks for your help.

30th Jan 2025 7:35am

Chicken Drumstick

Member Since: 17 Aug 2020
Location: Near MK
Posts: 788

Click image to enlarge

30th Jan 2025 1:27pm

Stacey007

Member Since: 25 Sep 2015
Location: Cheshire
Posts: 3790

Do you mean you are carry 4 passenger and want some to sleep in back off 110 and some outside?

If so a roof tent or awning attached to boot I think would be the only option?

30th Jan 2025 4:00pm

blackbeast

Member Since: 21 Mar 2024
Location: Lucerne
Posts: 4

I have a roof tent but I also need two sleeping places inside. It is important that I don't lose the rear row of seats, as I need at least 4 seats in total.

31st Jan 2025 9:05am

Stacey007

Member Since: 25 Sep 2015
Location: Cheshire
Posts: 3790

So the inside seats almost need to act like a VW camper (rock and roll bed) and Seats when your driving and fold completely flat when not to make a bed...

Unsure its doable (keeping your insurance valid) by modification to the seat / base etc

31st Jan 2025 9:11am

blackbeast

Member Since: 21 Mar 2024
Location: Lucerne
Posts: 4

I think a solution as shown in the following pictures would be perfect. Does anybody knows if there are any CAD drawings available for such kind of modification?

Click image to enlarge

31st Jan 2025 9:18am

Chicken Drumstick

Member Since: 17 Aug 2020
Location: Near MK
Posts: 788

CAD? Surely a tape measure and about 2 mins would do it?

Are you sure there is enough room for people to sleep there? Are you talking adults or children?

31st Jan 2025 9:38am

Julie

Member Since: 07 Oct 2017
Location: Nantes
Posts: 537

2012 Defender 110 Puma 2.2 SW Keswick Green

Re: Sleeping solution with 4 seats - Ideas?

blackbeast wrote:
Hello everyone,

I'm looking for a sleeping solution for my 110 TD4 that allows me to use the rear row of seats in full (I need a total of 4 seats).
Is there anyone who has a CAD drawing available or could draw one?

Or is there perhaps a ready-made system that can be installed?

EXTEC in Germany do sell it for the tdci. It's based on the rear seats that offer a good platform if in horizontal position.

I have a similar solution but I never use it. I prefer sleeping on the roof where I can leave everyting in the tent (AUTOHOME overzone)

If you just fold the seats in horizontal position you have a bed 80 cm x 170 cm (5 1/2 ft x 2 1/2 ft).

Last edited by Julie on 5th Feb 2025 8:01pm. Edited 1 time in total

5th Feb 2025 7:45pm

Julie

Member Since: 07 Oct 2017
Location: Nantes
Posts: 537

blackbeast wrote:
I have a roof tent but I also need two sleeping places inside. It is important that I don't lose the rear row of seats, as I need at least 4 seats in total.

What about an offroad trailer + roof tent ?

5th Feb 2025 7:51pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum