DEFENDER2.NET - View topic - Early 110 Locks, Slam or Non-Slam difference

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Early 110 Locks, Slam or Non-Slam difference

Page 1 of 1

Print this entire topic ·

luccie_007

Member Since: 06 Jan 2025
Location: Buchten
Posts: 2

Early 110 Locks, Slam or Non-Slam difference

Hello Everyone,

Im new but have been reading some time with the forum already.
Finnaly bought my own 110 and started upgrading and fixing stuff. (Early 110 1984 LHD)

Currently looking at my door situation with the locks.
I have 3 different keys to open 4 of the 5 locks.
But the barrels wil be ordered later,

First i have to decide if i am going to keep the internal opening Latch (MUC1216/MUC1217).
On the LH side the lock was already changed for some series type lock without a locking barrel and they removed all the linkages.

On the RH they fitted a Military door (i think) and reconnected the linkages but as the MUC1217 was replaced by an MUC3656 they broke the linkages. (as the sliding part is in a different spot).
But the Lock itself seems good.

Now i want to buy a new lock for LH, but there are 2 options,
Slam type and Non-Slam type.
Paddock had pictures of both.
MUC1032 vs MUC1034

Anyone know the difference/prefered version?
Both are anti burst if i am correct.

Or is the general advice to ditch the mechanism (which i like) and fir Series 3 locks? (395038)

RH

Click image to enlarge

LH

Click image to enlarge

6th Jan 2025 9:41pm

MarkBrown

Member Since: 03 Oct 2022
Location: Mid Wales
Posts: 488

1983 Defender 110 Other HT Auto Keswick Green

When I did mine I fitted anti burst series hinges and sold the original ones for quite a bit of money, as they’re rare. I wasn’t bothered about originality ( it was bought for me to modify and was missing quite a lot of parts too ) also I couldn’t find any door cards for them, but got a set of tough plastic ones for a series three to fit nicely. 1983 110 automatic OM606

7th Jan 2025 8:02am

luccie_007

Member Since: 06 Jan 2025
Location: Buchten
Posts: 2

Okay thanks or your input,

You got a picture of the doorcards?

Ive found 3 versions so far.
SP4s4 TR253A https://www.sp-4x4.com/ProductDetails.asp?...p;CartID=2
Mud UK MUD-0040 https://www.mudstuff.co.uk/products/half-door-trim
Britpart DA1642 https://www.britpart.com/parts/seats-and-t...ims/da1642

The SP and britpart look the same though.
And i've gotten 1 of those with my defender when I bought it.
Don't know which one.

Just fitted the back doorlock to the RH side to test with this internal handle.
Cant get the plate to fit over it without bending a lot, so have to figure that out. (Heard someone removed the top to twist the plate over the handle.)

Bodged doorcard RH side. (With old/original lock)

Click image to enlarge

Also Found in my parts catalog that the reardoor contains an MUC1030 which says Non-Slam

8th Jan 2025 11:32am

MarkBrown

Member Since: 03 Oct 2022
Location: Mid Wales
Posts: 488

They are the mud stuff ones. 1983 110 automatic OM606

8th Jan 2025 12:24pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum