Home > Modifications & Maintenance (L663) > Wipers too Long? |
|
|
LR Nuts Member Since: 10 Aug 2022 Location: UK Posts: 1143 |
are you sure the wiper arm, not the blade, is in the correct position
|
||
16th Dec 2024 9:56pm |
|
Chris_P Member Since: 13 Dec 2024 Location: Montgomery, TX Posts: 6 |
Could be incorrect; trying to figure if that might be the isssue. Looks like it was the same arm that was sold when brand new. I have a close up picture of this vehicle in action at the TReK event before sold from the dealer. Maybe it was damaged before this picture and replaced with another model LR.
Click image to enlarge Click image to enlarge |
||
16th Dec 2024 10:05pm |
|
R1 paul Member Since: 30 Dec 2022 Location: Hungerford Posts: 1 |
22” is correct, I bought some from LR parts. Think they also fit a VW Beetle
|
||
18th Dec 2024 10:27am |
|
Chris_P Member Since: 13 Dec 2024 Location: Montgomery, TX Posts: 6 |
You may be correct. I have a sneaking suspension that the arm was set wrong in the past and the splines in the arm are damaged. I took a stab at re-clocking and it’s not hitting the A-pillar trim but a little higher than I would like. Since the splines are damaged, seems it can only be either a bit too low or a bit too high, but good enough now. |
||
18th Dec 2024 2:19pm |
|
Defendit.. Member Since: 09 Aug 2020 Location: 's-Hertogenbosch Posts: 431 |
Bosch A889S 57,5 cm = 22,63"
Click image to enlarge No Mud flaps for my 90.! ----------------------------------------- P300s MY21 Keswick Green on air, adv.+ offroad pack, DRL+fog, Dinamica Suedecloth + Ebony headliner/Cross Beam- Many Mods.. |
||
18th Dec 2024 3:21pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis