DEFENDER2.NET - View topic - Interior roof wireing harness questions

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > In Car Electronics > Interior roof wireing harness questions

Page 1 of 1

Print this entire topic ·

V8Simon

Member Since: 17 May 2016
Location: Prestatyn, Wales
Posts: 146

1985 Defender 90 V8 Petrol SW Auto Arles Blue

Interior roof wireing harness questions

Hi all,
I'm retrofitting puma roof light wiring harness to my 90 having purchased the right bit a while ago and could do with some help with how the wiring is laid out/clicks to inside the vehicle and confirming where the connectors go to.....

At the end that connects into the main harness at the top of the A piller by the drivers door, there is a clear connector with two wires and a black one separate. There are two of these in the harness a short distance apart so I presume they are for the interior lights, front and middle of the vehicles headlining?

Click image to enlarge

Click image to enlarge

Between the two, there is a tiny black connector with very small wires, I'm presuming this is something do with an alarm sensors??

Click image to enlarge

At the far end of the harness, theres a grommet with a clear connector the other side of it, I presume this goes outside but where to and what for?

Click image to enlarge

Any help appreciated as always.

Simon 1984 90 V8 puma want to be.

Last edited by V8Simon on 9th Sep 2024 3:05pm. Edited 1 time in total

7th Sep 2024 3:43pm

PaulMc

Member Since: 17 Jan 2009
Location: Kent
Posts: 500

As you've said -

The first two are for the interiors lamps - 3-way 'natural' (live and switched earth) + black (earth).

The black 4-way is for the alarm sensor.

The last one - 'natural' 2-way sealed connector, is for central locking on the tail door.

. Paul.
1989 Arles Blue 2.5TD 110 Hardtop
1999 Epsom Green Discovery II 4.0 V8i 'XS'

7th Sep 2024 6:18pm

V8Simon

Member Since: 17 May 2016
Location: Prestatyn, Wales
Posts: 146

Thanks Paul, that clears that up then.

The end section with the grommet doesn't seem long enough to go anywhere near the back door, where should the grommet sit? 1984 90 V8 puma want to be.

7th Sep 2024 9:30pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum