DEFENDER2.NET - View topic - Clutch bleeding after lay up

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Clutch bleeding after lay up

Page 1 of 1

Print this entire topic ·

tankpeople

Member Since: 30 Dec 2023
Location: Fife
Posts: 16

Clutch bleeding after lay up

Ive been rebuilding my 2.4 tdci on a new chassis etc and fitted a new clutch with new release bearing + the new adaptor . Its been 7 months dry now and I cant seem to get any pressure from the master cylinder ?. Used Gunson bleeder and normal pedal method but the master doesn't gain any pressure. Decided to remove the pedal box and get it on the bench to assess and renew the master cylinder - but I can't get the pedal box out as its shoehorned in ?? ( the mats inside dont help either) .
Any guidance as what to remove in addition please much appreciated - brake pedal box ?.

9th Aug 2024 9:10am

Ianh

Member Since: 17 Sep 2018
Location: Essex
Posts: 2027

On the Puma you can remove the clutch MC without taking the pedal box out.

See page 2 and page 3 of this topic. https://www.defender2.net/forum/topic71892...t=cylinder

9th Aug 2024 9:32am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum