Home > Puma (Tdci) > BAS 170bhp remap |
|
|
Simboii Member Since: 09 Jun 2021 Location: Carmarthen Posts: 70 |
Any other mods other than remap??
Still got the dpf and egr in place? Bigger intercooler? Looking to have this done myself! Should make it better on fuel too shouldnt it? |
||
11th Feb 2024 11:25am |
|
Glen-I Member Since: 21 Oct 2023 Location: Berkshire Posts: 35 |
No other mods, and DPF and EGR still in place.
My commute to my office is a 160mile round trip which consists of the A34 and M40, so it gets a good run, so I'm not to worried about the DPF. I did spend a considerable about of time eliminating the driveline slack through replacing the gearbox output shaft (very worn!) for a Aschroft unit, the rear half shafts have been replaced with 1 piece items and I've removed and refitted the rear diff pinion flange, but using Loctite 660 on the splines as I was getting a noise from the rear diff where the flange was actually moving on the diff pinion. All of this has completely reduced the driveline slack. So now with the remap, I can drive it a little harder without being so mechanically sympathetic (within reason!). I'm expecting it to be better on fuel, but too early to say yet. My TD5 was remapped and I was getting about 50 miles more out of a tank of fuel. |
||
11th Feb 2024 12:39pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis