DEFENDER2.NET - View topic - [sorted] 110 utility side panels could swap for station wago

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > For Sale & Wanted > [sorted] 110 utility side panels could swap for station wago

Page 1 of 1

Print this entire topic ·

SailingTom

Member Since: 19 Nov 2013
Location: ESSEX
Posts: 1722

[sorted] 110 utility side panels could swap for station wago

Hi there
I’m after a pair of utility side panels
Must be straight.
Ideally Fuji white but any colours could work.
Potential to exchange for station wagon sides with windows
Thanks Tom Defender puma dormobile camper

Last edited by SailingTom on 19th Apr 2024 3:31pm. Edited 1 time in total

4th Oct 2023 9:04pm

camelman

Member Since: 27 Feb 2013
Location: Peak District
Posts: 3373

I believe series 3 swb panels fit.

5th Oct 2023 6:03am

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17388

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

88" side panels do fit (SII, IIA, or III) but look different with different rivet patterns and the door seal is different. They will work if you don't mind the differences.

The genuine parts are ARR710450 (n/s) and ARR710440 (o/s) and they are still available new, but cost around a grand each (most suppliers also illustrate them with window holes for some reason, these part numbers are for the solid sides).

5th Oct 2023 10:15am

SailingTom

Member Since: 19 Nov 2013
Location: ESSEX
Posts: 1722

Thanks guys yes the 88 fit but as said aren’t quite the same which is what I’m after 👍👍 Defender puma dormobile camper

5th Oct 2023 8:57pm

Shroppy

Member Since: 25 Feb 2016
Location: Shropshire
Posts: 866

1986 Defender 130 V8 Petrol HCPU Aintree Green

Have you considered reskinning your sides? I recall seeing some photos of the process somewhere, IIRC the outer skin is relatively simple with only 1 or 2 folds. 1985 127 V8 Build Thread
Series 2 109"
Series 1 80"

6th Oct 2023 9:27am

Porny
Site Sponsor

Member Since: 31 Aug 2009
Location: Sutton Coldfield - West Midlands
Posts: 809

I've got an immaculate pair of sides, that I was saving for my own build - but that keeps getting pushed back... £1200 ovno

Are in Galway Green.

Are as close as possibe to a new take off.

Cheaper than the £850 + vat each new.

Located West Midlands IRB
The home of the first modified Keswick Green 90 - and the first 2.4 Puma through both the 200bhp and 550Nm barriers.

www.IRBdevelopments.com

www.facebook.com/irbdevelopments

www.integrated316.com

www.facebook.com/integrated316

9th Oct 2023 10:34am

Hazza

Member Since: 10 Jan 2011
Location: North Yorkshire / Leeds
Posts: 215

Shroppy wrote:
Have you considered reskinning your sides? I recall seeing some photos of the process somewhere, IIRC the outer skin is relatively simple with only 1 or 2 folds.

I'm about to do just this - I've had panels cut to size and if they fit as planned I'll be happy to share the dimensions 1990 Defender 110 200TDI Camper - now converted to Td5 power

9th Oct 2023 8:11pm

julian

Member Since: 17 Feb 2017
Location: Devon
Posts: 107

1994 Defender 110 300 Tdi CSW Alpine White

Hazza wrote:
I'm about to do just this - I've had panels cut to size and if they fit as planned I'll be happy to share the dimensions

Ive got a 300tdi CSW and ive been considering swapping the sides. In truth, ive not really looked at how the existing ones are constructed. I assumed they were single piece as an L shape, but now im wondering if that is the case?

How far along are you with your plans?

Thank you.

20th Jan 2024 9:24pm

Hazza

Member Since: 10 Jan 2011
Location: North Yorkshire / Leeds
Posts: 215

There's a bit more to them than that, but skinning them is easy with a couple of pieces of aluminium. 1990 Defender 110 200TDI Camper - now converted to Td5 power

20th Jan 2024 9:35pm

geobloke

Member Since: 06 Nov 2012
Location: Nottinghamshire
Posts: 4410

I am planning the same thing for Miffy. With the dog crate in the back there is no need for the windows and they will be more secure without them. Interesting idea about the re-skinning, actually a great idea, I always prefer recycling parts rather than just buying them.

Would love those dimensions if you wouldn't mind

21st Jan 2024 8:58am

Hazza

Member Since: 10 Jan 2011
Location: North Yorkshire / Leeds
Posts: 215

Click image to enlarge
Just the one set of dimensions, I had a panel of 3mm Aluminium Composite cut to do the job. I don't have the dimensions written down for the side panel, but essentially it's 520mm X length of panel. My side panels are older and have a strip at the door seal edge, newer panels don't have this so you can run all the way up to the door.

Hope that helps! I used sikaflex equivalent to bond the panels on, and also used it to fill/tidy where the two pieces met. Similar to what you'd see on panoramic glass installs on Defender sides.

Aluminium Composite will give you a much more rigid side panel, so hopefully less drumming and you don't need to worry about the missing strengthening rib 1990 Defender 110 200TDI Camper - now converted to Td5 power

21st Jan 2024 7:05pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum