DEFENDER2.NET - View topic - Non-Standard Steel Wheel Choices

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Wheels & Tyres > Non-Standard Steel Wheel Choices

Page 1 of 1

Print this entire topic ·

Pace

Member Since: 19 Mar 2021
Location: Somerset
Posts: 75

2013 Defender 90 Puma 2.2 HT Corris Grey

Non-Standard Steel Wheel Choices

Hi All, I'm looking at changing my wheels to steel after years on alloys of one sort or another. I want to check I have considered all the options before pulling the trigger on the usual suspects.

I know this has been asked hundreds of times but no one will know like you fine gentlemen. What choices are oute there that aren't the plain standard steel rim, wolfs, 8 spokes or modulars?

Also not a fan of Mach 5/ZU style of rim though I understand those are alloy.

What else exists and look like they belong on the truck? The truck is black if that makes a difference.

24th Jul 2023 9:27pm

DSC-off

Member Since: 16 Oct 2014
Location: North East
Posts: 1400

2015 Defender 110 Puma 2.2 XS CSW Aintree Green

What else exists and look like they belong on the truck?

The only steel wheels that look like they belong on a Defender are,
Standard steels.
Wolf, or non genuine wolf style with a different offset.
Nakatanenga ANR, 8x16"

https://www.defender2.net/forum/topic80500.html

24th Jul 2023 9:52pm

Chicken Drumstick

Member Since: 17 Aug 2020
Location: Near MK
Posts: 717

Re: Non-Standard Steel Wheel Choices

Pace wrote:
Hi All, I'm looking at changing my wheels to steel after years on alloys of one sort or another. I want to check I have considered all the options before pulling the trigger on the usual suspects.

I know this has been asked hundreds of times but no one will know like you fine gentlemen. What choices are oute there that aren't the plain standard steel rim, wolfs, 8 spokes or modulars?

Also not a fan of Mach 5/ZU style of rim though I understand those are alloy.

What else exists and look like they belong on the truck? The truck is black if that makes a difference.

What are you after exactly, if you are ruling out 8 spokes or modular rims?

Mach 5 certainly used to be steel. Although I believe an alloy variant or look a like was offered later on.

Lots of rims over the years, but you may only find some 2nd these days such as the Weller 15" rims.

25th Jul 2023 8:33am

Chicken Drumstick

Member Since: 17 Aug 2020
Location: Near MK
Posts: 717

DSC-off wrote:
What else exists and look like they belong on the truck?

The only steel wheels that look like they belong on a Defender are,
Standard steels.
Wolf, or non genuine wolf style with a different offset.
Nakatanenga ANR, 8x16"

https://www.defender2.net/forum/topic80500.html

Don't agree with that at all...

25th Jul 2023 8:33am

jpboost

Member Since: 13 Apr 2021
Location: Gatwick
Posts: 377

2014 Defender 110 Puma 2.2 SW Keswick Green

I believe Urban/Kahn/Chelsea MoCo also do various steel wheels in the appropriate fitment.

Lucari have also launched a deeper dished steel wheel. Available in 16 & 18" fitments.

There's also various banded steel options, but people's opinions on these tend to be fairly divided. I was very tempted to get my spare set of wolfs banded, but in the end wanted an 18" rim so went a different direction.

25th Jul 2023 9:49am

Pace

Member Since: 19 Mar 2021
Location: Somerset
Posts: 75

Re: Non-Standard Steel Wheel Choices

Chicken Drumstick wrote:
Pace wrote:
Hi All, I'm looking at changing my wheels to steel after years on alloys of one sort or another. I want to check I have considered all the options before pulling the trigger on the usual suspects.

I know this has been asked hundreds of times but no one will know like you fine gentlemen. What choices are oute there that aren't the plain standard steel rim, wolfs, 8 spokes or modulars?

Also not a fan of Mach 5/ZU style of rim though I understand those are alloy.

What else exists and look like they belong on the truck? The truck is black if that makes a difference.

What are you after exactly, if you are ruling out 8 spokes or modular rims?

Mach 5 certainly used to be steel. Although I believe an alloy variant or look a like was offered later on.

Lots of rims over the years, but you may only find some 2nd these days such as the Weller 15" rims.

I wouldn't say I'm ruling them out, just looking for less common alternatives. It looks like most peoples' choices are limited to just a few designs so it would be good to see what else is about.

25th Jul 2023 10:04am

Chicken Drumstick

Member Since: 17 Aug 2020
Location: Near MK
Posts: 717

Steel wheels have always had less flamboyant designs than alloy ones. Not just Land Rover, but pretty much all cars. I suspect you won't find a huge variety really. And these days of bling and Defenders being handbag fashion accessories have likely had an impact on the availability of steel wheels, as most of the modern set seem to want shiny blinged up tat to bolt onto their vehicles. Which steel wheels don't really offer.

I think Land Rover fitted something like these to some US Series models:

Click image to enlarge

Not the longer square spokes as opposed the triangle shaped spokes of most 8 spokes.

I have also seen 10 spoke rims along the same style as regular 8 spokes.

You have the traditional Land Rover rim and in wider offset One Ton versions or the very rare 2B variant. You can sort of buy replicas these days upto 8" wide.

Discovery 5 spokes can look quite nice.

Range Rover Rostyle rims.

With some spacers you could probably get Disco 2 steels to fit and a bit more work again probably the new steel rim for the new Defender.

Wolf or 130 rims.

And an array of modular types varying in the number of holes, shape, size and other details.

I'm sure with a bit of ingenuity you could also get wheels for other vehicles to fit maybe Toyota, Ford etc.

25th Jul 2023 11:42am

hornet

Member Since: 04 Jan 2010
Location: Western Europe
Posts: 361

I have the Dotz Dakar since 2009 and am quite happy with them. I had the last set sandblasted, primed and powder-coated. This costs as much as a new set but is hopefully more sustainable.
In my opinion a very nice and suitable rim for the vehicle. And cheap!

Very similar to Chicken Drumstick's picture!

13th Dec 2023 2:16pm

kenzle8a

Member Since: 12 Feb 2020
Location: None
Posts: 1074

I quite like these, price isn't bad either.

https://www.roguealloy.co.uk/product-page/...ooth-style

13th Dec 2023 6:24pm

geobloke

Member Since: 06 Nov 2012
Location: Nottinghamshire
Posts: 4410

Those are chunky, like them a lot

13th Dec 2023 7:35pm

L110CDL

Member Since: 31 Oct 2015
Location: Devon
Posts: 10742

Aren't they like the Khan wheels, i think they are the 1947 ( not 100% the right name for them ) rims

1996 Golf Blue 300Tdi 110 Pick up.

Keeper.

Clayton.

13th Dec 2023 8:30pm

Pace

Member Since: 19 Mar 2021
Location: Somerset
Posts: 75

I never did thank everyone for their input having been intermittently out of the country without access to the internet for extended periods since posting.

I am sure no one is particularly interested, but in the end I opted for some One Ton style rims, which I am happy with. I still wish there was something harder wearing than an alloy but more interesting than a steel rim, which crucially looks like it could have come from the factory.

26th Dec 2023 10:41am

L110CDL

Member Since: 31 Oct 2015
Location: Devon
Posts: 10742

Thank you for the update Pace

Would love to see a pic of your rims fitted, many thanks

1996 Golf Blue 300Tdi 110 Pick up.

Keeper.

Clayton.

5th Jan 2024 9:39pm

Pace

Member Since: 19 Mar 2021
Location: Somerset
Posts: 75

I will endeavour, but I am not great with the whole internet/computer thing! I went for a set of these, painted white to look more standard.

https://www.nakatanenga.de/en/vehicle-equi...l-rim-8x16

10th Jan 2024 6:41pm

L110CDL

Member Since: 31 Oct 2015
Location: Devon
Posts: 10742

Yes i was like that to begin with down loading pics and and other information but it's surprising how quick you learn to do this

I do like those rims, nice choice

1996 Golf Blue 300Tdi 110 Pick up.

Keeper.

Clayton.

11th Jan 2024 9:32pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum