DEFENDER2.NET - View topic - Activating ACC, ATPC, TR2 Auto, Park Assist, wheel size etc

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > General & Technical (L663) > Activating ACC, ATPC, TR2 Auto, Park Assist, wheel size etc

Page 8 of 11

3 ...

Print this entire topic ·

pjeski

Member Since: 25 Jul 2023
Location: Michigan
Posts: 107

verrilli wrote:
aquascape wrote:
Possible park assist settings

Activate Park Assist
EUCD-059 Parking Assistance
Standard: Without Parking Assistance
Change to: PDC (Front, Rear) - Parking (Parallel, Exit)

EUCD-099 Park Assist Camera
Standard: Without Park Assist Camera
Change to: With Park Assist Camera

EUCD-140 Pdcautoactivationmenu
Standard: Not supported
Change to: With PDC Auto Activation menu

MultiCAN-469 PDCAutoActivation
Standard: Not Supported
Change to: Default OFF configurable

MultiCAN-500 PDCBtnFCIM
Standard: Not supported
Change to: Fitted

MultiCAN-602 PDC
Standard: PDC not fitted
Change to: 10 Channel fitted ( Park Assist)

MultiCAN-786 Park Assist
Standard: Not Fitted
Change to: Full Auto VarD (Fully automated park assist with automated steering breaking accelaration and gears)

This worked for me. It does the whole process by itself - forward / reverse and steering. Thanks!

Has anyone tried the setting for EUCD-059 that also adds perpendicular?
PDC (Front, Rear) - Parking (Parallel, Perpendicular, Exit)

30th Nov 2023 9:48pm

verrilli

Member Since: 23 Aug 2023
Location: North Carolina
Posts: 9

I did PDC (Front, Rear) - Parking (Parallel, Exit) and it enabled Parallel and Perpendicular but not exit. Also, forward is not an option, only reverse.

1st Dec 2023 12:15am

tooth_dr

Member Since: 26 May 2021
Location: Northern Ireland
Posts: 236

For anyone who downloaded the 72 hour trial. Did the 72 hours start at time of purchase or time of download and subsequent installation?

1st Dec 2023 9:25am

Nelu

Member Since: 07 Jun 2021
Location: Constanta
Posts: 6

ckamps wrote:
Quote:
Can the trailer reversing mode be activated by the jet tool? I was able to get it partially working by gap but ended up with the usual errors.

I used the JET Pro tool to enable advanced tow assist on my 2021 D90 First Edition (US) without any apparent errors, but I had not yet taken the time to test it. (ACC was my top priority).

Spurred on by your post, I hooked up a trailer and gave it a go this evening. It appears to work as expected. Since it was getting dark, I'll need to give a real test during the day tomorrow.

Here's a pic of it in effect. I didn't notice any errors and all of the features as documented seemed to be available. During my brief test this evening, auto steering kicked in as well.

Click image to enlarge

Can you please point me tot he right script to activate the tow assist?
Thank you New Defender D240, Gondwana Stone

2nd Dec 2023 2:21pm

tooth_dr

Member Since: 26 May 2021
Location: Northern Ireland
Posts: 236

Bad time for the thread to go quiet!

I’m having problems. My script list has changed since this morning and I did a reload of my base settings and now can’t find for example option 5 to open tailgate.

2nd Dec 2023 5:46pm

DefenderMidlands

Member Since: 08 Mar 2023
Location: West Midlands
Posts: 226

I would manually change the ccf files if you cannot find the relevant script, as below for example

Remote tailgate release
MultiCAN-770 Remote Release Tailgate
Enabled MY23 D250 Defender 110 X-Dynamic SE, Carpathian Grey, 7 Seat, Electric Towbar

2nd Dec 2023 6:51pm

ckamps

Member Since: 04 Jul 2023
Location: Oregon
Posts: 37

Nelu wrote:
ckamps wrote:
Quote:
Can the trailer reversing mode be activated by the jet tool? I was able to get it partially working by gap but ended up with the usual errors.

I used the JET Pro tool to enable advanced tow assist on my 2021 D90 First Edition (US) without any apparent errors, but I had not yet taken the time to test it. (ACC was my top priority).

Spurred on by your post, I hooked up a trailer and gave it a go this evening. It appears to work as expected. Since it was getting dark, I'll need to give a real test during the day tomorrow.

Here's a pic of it in effect. I didn't notice any errors and all of the features as documented seemed to be available. During my brief test this evening, auto steering kicked in as well.

Click image to enlarge

Can you please point me tot he right script to activate the tow assist?
Thank you

See near bottom of page 7 of this thread to see the answer. I edited the CCF settings directly. 2021 D90 Pangea First Edition
2022 D110 X-Dynamic HSE Eiger Grey

2nd Dec 2023 7:06pm

tooth_dr

Member Since: 26 May 2021
Location: Northern Ireland
Posts: 236

aquascape wrote:
I would manually change the ccf files if you cannot find the relevant script, as below for example

Remote tailgate release
MultiCAN-770 Remote Release Tailgate
Enabled

Thank you. I’m maybe being stupid but wasn’t share where to find manual entry?

2nd Dec 2023 9:32pm

Nelu

Member Since: 07 Jun 2021
Location: Constanta
Posts: 6

tooth_dr wrote:
For anyone who downloaded the 72 hour trial. Did the 72 hours start at time of purchase or time of download and subsequent installation?

The trial start at the moment you add the code to start the software. New Defender D240, Gondwana Stone

3rd Dec 2023 7:42am

tooth_dr

Member Since: 26 May 2021
Location: Northern Ireland
Posts: 236

Thank you Nelu

3rd Dec 2023 9:18am

tooth_dr

Member Since: 26 May 2021
Location: Northern Ireland
Posts: 236

I’ve just installed ACC on the car, but notice now my wing mirrors aren’t folding on locking. Does that mean it hasn’t worked properly or something else?

3rd Dec 2023 10:55am

Nelu

Member Since: 07 Jun 2021
Location: Constanta
Posts: 6

I have enabled approach unlocking and walk away unlocking, I have the settings on PIVI but after I enable them they return to disabled mod in about 3 seconds and remain disabled. Do you know a workaround to have them stay enabled? New Defender D240, Gondwana Stone

3rd Dec 2023 11:13am

Defendit..

Member Since: 09 Aug 2020
Location: 's-Hertogenbosch
Posts: 422

Probably not working on a 2020,
I've read somewhere this only works on a 2022/23+ No Mud flaps for my 90.!
-----------------------------------------
P300 S MY21 on air, adv.+ offroad pack, DRL+fog, Dinamica Suedecloth + Ebony headliner/Cross Beam- Many Mods..

3rd Dec 2023 1:04pm

DefenderMidlands

Member Since: 08 Mar 2023
Location: West Midlands
Posts: 226

I think if you have a locking fuel cap walk away and approach unlocking won’t work MY23 D250 Defender 110 X-Dynamic SE, Carpathian Grey, 7 Seat, Electric Towbar

3rd Dec 2023 1:50pm

tooth_dr

Member Since: 26 May 2021
Location: Northern Ireland
Posts: 236

Start is greyed out. Maybe just where I’m trying to test it - on my driveway - or a missing code?

Click image to enlarge

3rd Dec 2023 2:09pm

Page 8 of 11

3 ...

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum