↓ Advertise on Defender2 ↓

Home > Wheels & Tyres (L663) > 18 inch rub caliper on D200
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Modder



Member Since: 29 Nov 2024
Location: Wuustwezel
Posts: 16
Belgium 
18 inch rub caliper on D200
Hi All
I have a Defender 90 D200 S with stock 19 inch rims. For the winter i want to switch to 18 inch OZ rally raid Black rims.
Today during the fitting the rims Just rubt the brake calipers both front and rear leaving a small sratch.
The rims are 8,5 inch with et of 38.
Does anyone else had similar issues with 18 inch rims and the small brake setups?

Last edited by Modder on 30th Nov 2024 10:48am. Edited 1 time in total
Post #1053401 29th Nov 2024 11:07pm
View user's profile Send private message View poster's gallery Reply with quote
Retroanaconda



Member Since: 04 Jan 2012
Location: Scotland
Posts: 2656
Scotland 
Sounds like a problem with the wheels. The standard 18” steel wheels fit fine with plenty of clearance.
Post #1053418 30th Nov 2024 8:44am
View user's profile Send private message View poster's gallery Reply with quote
Modder



Member Since: 29 Nov 2024
Location: Wuustwezel
Posts: 16
Belgium 
Does someone has a picture of the normal clearance with 18 inch wheels?
Post #1053425 30th Nov 2024 9:38am
View user's profile Send private message View poster's gallery Reply with quote
sasa



Member Since: 05 Mar 2024
Location: ceska lipa
Posts: 51
Czech Republic 
I don't know if it's good to see.


Click image to enlarge

Click image to enlarge

Click image to enlarge
Post #1053567 1st Dec 2024 1:45pm
View user's profile Send private message View poster's gallery Reply with quote
BadgerWaz



Member Since: 15 Jul 2024
Location: Linconshire
Posts: 92
United Kingdom 
If the caliper is rubbing the rear face of the steel wheels couldn't you fit some wheel spacers to move it further out?
The offset you have is lower than the stock wheels so that seems to be your issue.

I bought some wheel spacers a few months back to use with my alloys but I've since taken them off. 30mm Terrafirma ones, they were only £145 to buy.
Post #1053582 1st Dec 2024 4:17pm
View user's profile Send private message View poster's gallery Reply with quote
Modder



Member Since: 29 Nov 2024
Location: Wuustwezel
Posts: 16
Belgium 
sasa wrote:
I don't know if it's good to see.


Thanks that gives a good idee like its close but still some room
Post #1053595 1st Dec 2024 7:58pm
View user's profile Send private message View poster's gallery Reply with quote
Modder



Member Since: 29 Nov 2024
Location: Wuustwezel
Posts: 16
Belgium 
BadgerWaz wrote:
If the caliper is rubbing the rear face of the steel wheels couldn't you fit some wheel spacers to move it further out?
The offset you have is lower than the stock wheels so that seems to be your issue.

I bought some wheel spacers a few months back to use with my alloys but I've since taken them off. 30mm Terrafirma ones, they were only £145 to buy.


Will take a look at spacers, but don't want to go to wide as they are illegal in Belgium. So i dont want it to stand out too much.
Post #1053596 1st Dec 2024 7:59pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums