DEFENDER2.NET - View topic

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > General & Technical (L663) > D200/250/300

Page 1 of 1

Print this entire topic ·

lightning

Member Since: 23 Apr 2009
Location: High Peak, Derbyshire
Posts: 2748

D200/250/300

Has it been determined that changing the engine type from "D250" to "D300" with the GAP tool makes no difference?

If so, why is the option in the programming, if it doesn't do anything except flag up a warning that the engine type setting is "not original".

23rd Sep 2024 7:26pm

lightning

Member Since: 23 Apr 2009
Location: High Peak, Derbyshire
Posts: 2748

l guess not then.

25th Sep 2024 2:32pm

zilch

Member Since: 11 Sep 2019
Location: Whitsundays & Sydney
Posts: 816

How does it stack in terms of insurance liability? in particular on the brakes on the D200/250 vs D300
which usually has larger brakes (same as P400). Assume the smaller brake package could be adequate
(some contingency in terms of stopping power built in), but if never tested officially i would assume that
if an insurance company discovered it in some weird way, they would look to void a claim??

In Oz we have been blessed that a company called Tuff Ant have gone through certification to enable
the rear calipers to be changed on P400/D300 models so we can fit 18" wheels and not void warranty
and insurance issues, they use LR OEM D5 calipers that fit snug within their 18" alloys but have the same
piston bores, stopping power and even the same brake pads as the original.. yet another pommie bar steward down under

MY20 110 P400 SE Defender
MY10 3.0 RR Sport

26th Sep 2024 2:42am

lightning

Member Since: 23 Apr 2009
Location: High Peak, Derbyshire
Posts: 2748

You should always tell the insurance company about a remap, or they could refuse to pay out as you suggest.

ln my experience
in the U.K. it's usually okay with insurance companies so long as the remap or "engine chip" as the insurance refers to it, is between 10 and 25%.

So on a D250 that would be an extra 25-60bhp.

27th Sep 2024 6:44pm

Crazymind

Member Since: 11 Jun 2024
Location: Glasgow
Posts: 139

In terms of breaking power there is no difference between large and standard.
The standard disk size is already over sized. Land Rover did a very good job here.
However largest disk size will be more fade resistant, for someone towing a lot or someone driving like nuts it will certainly give more confidence and larger bill when replacing pads and disks.
Going to d250 to d300 I don’t really see any mechanical issue with breaking power.

28th Sep 2024 7:25am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum