Home > Puma (Tdci) > Front Prop Shaft Replacement - supplier? |
|
|
Ianh Member Since: 17 Sep 2018 Location: Essex Posts: 2028 |
Have a look at the Gwyn Lewis offerings https://gwynlewis4x4.co.uk/product-categor...puma-tdci/
|
||
20th Sep 2024 10:27am |
|
Mo Murphy Member Since: 01 Jun 2008 Location: Letchworth Garden City, Herts Posts: 2244 |
Bailey-Morris do them too
https://www.baileymorris.co.uk/ Mo The Land Rover 90 - Many are called, few are chosen. 50 Shades of Pennine Grey |
||
20th Sep 2024 10:31am |
|
Ianh Member Since: 17 Sep 2018 Location: Essex Posts: 2028 |
I’ve always wondered if Bailey Morris supply Gwyn Lewis.
|
||
20th Sep 2024 10:48am |
|
landy andy Member Since: 15 Feb 2009 Location: Ware, Herts Posts: 5724 |
Bailey Morris used to supply Gwyn, but they had a big falling out, don’t know what over. Possibly phasing. Now Gwyn has a different source made to his spec.
|
||
20th Sep 2024 11:26am |
|
Ianh Member Since: 17 Sep 2018 Location: Essex Posts: 2028 |
Thanks Andy... I suspected that was the case as Gwyn’s props looked like Bailey Morris ones up until a couple of years ago.
|
||
20th Sep 2024 11:43am |
|
roche1800 Member Since: 07 Apr 2020 Location: derbyshire Posts: 334 |
Which manufacturer/supplier is considered good value and reliable
|
||
20th Sep 2024 1:34pm |
|
landy andy Member Since: 15 Feb 2009 Location: Ware, Herts Posts: 5724 |
I’d say both Gwyn and Bailey Morris are the best out there that I know of. I’d happily have either. I certainly wouldn’t be buying from a LR dealer.
Bailey Morris will rebuild yours I believe, if you can be without for a while. |
||
20th Sep 2024 1:41pm |
|
DJow Member Since: 29 Oct 2023 Location: Yorkshire Dales Posts: 14 |
I just bought a genuine from Twisted, taken from a delivery mileage defender for £70.
|
||
20th Sep 2024 2:21pm |
|
custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20436 |
Bailey Morris do balancing as well I think.
I think they are who supply D44 too, as in the B-M link you can see one of D44’s challenge Defenders as well, and they do I think have some listed on their website too. I don’t know why people need an Uber super duper prop really unless they are building a challenge machine etc, but, if you can why not of course. They are very very expensive but are very good but for most people Hardy Spicer and GKN is fine. $W33T $0U7H3RN $UG4R 🇬🇧🏴🏴🏴🇮🇪🇺🇸⛽️🛢️⚙️🧰💪 |
||
20th Sep 2024 5:44pm |
|
BrickBox Member Since: 05 Oct 2021 Location: Wales Posts: 833 |
I did the same also. As new. 2008 2.4 110 Utility Station Wagon XS. |
||
20th Sep 2024 5:50pm |
|
Dinnu Member Since: 24 Dec 2019 Location: Lija Posts: 3419 |
The UJs can be replaced very easily. If you however have wear in the sliding joint, or shaft has been mechanically damaged (bent), new shaft will be required. 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black |
||
21st Sep 2024 6:15am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis