↓ Advertise on Defender2 ↓

Home > My New Defender (L663) > Defender 90 Load Space / Boot Liner
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
lucky247



Member Since: 23 Aug 2023
Location: London
Posts: 10
United Kingdom 
Defender 90 Load Space / Boot Liner
Have had my new 90 a few weeks now and am looking for a load space/boot liner to cover the boot and seat backs etc when all folded flat.

Does anyone have one, taking account the loadspace tray and resulting flat floor with the seats down?

Has anyone used 'Titan Covers' based in Leicestershire? I've spoken to them and their option for a 2020 onwards design won't fit with loadspace tray, but they have offered a free cover in return for letting them template the vehicle.
Does anyone want to take them up on this offer?! as it's an 8 hour round trip for me.
They need the car for a couple of hours to template and measure, then a week later to fit and get some promo photos.

Attached screenshot of their Def 90 2020 cover on generic car (in my gallery), but shows the sort of liner i'm looking for. All flat and up the back of the front seats.

Have also spoken to 'Hatchbag' but they can't accommodate the tray and want me to remove it.

Thanks

Last edited by lucky247 on 17th Sep 2024 4:43pm. Edited 1 time in total
Post #1046019 17th Sep 2024 2:35pm
View user's profile Send private message View poster's gallery Reply with quote
Colin68



Member Since: 18 Jul 2024
Location: Blackpool
Posts: 113
United Kingdom 
You mean like this?

Click image to enlarge
Post #1046023 17th Sep 2024 4:21pm
View user's profile Send private message View poster's gallery Reply with quote
ruben



Member Since: 04 Feb 2021
Location: ASTURIAS
Posts: 318
Spain 
lucky247 wrote:
Have had my new 90 a few weeks now and am looking for a load space/boot liner to cover the boot and seat backs etc when all folded flat.

Does anyone have one, taking account the loadspace tray and resulting flat floor with the seats down?


Thanks


I wonder if a OEM LR 130 load boot liner could cover everything you want, taking advantage of the fact that it already has the necessary shapes and cutouts with precision? Have you thought about this? Could it match the necessary measurements? At least in width it would fit for sure…Im sorry its only one idea!!
I leave a link about it!!

https://www.powerfuluk.com/products/rubber...ow-seating Defender 110 SE I6 D250 23MY
ExDiscovery 3 TDV6 SE

Last edited by ruben on 17th Sep 2024 4:37pm. Edited 1 time in total
Post #1046024 17th Sep 2024 4:23pm
View user's profile Send private message View poster's gallery Reply with quote
lucky247



Member Since: 23 Aug 2023
Location: London
Posts: 10
United Kingdom 
Colin68 wrote:
You mean like this?

Click image to enlarge


That's just the boot with a loadspace tray and it's lid in the wrong place.

I'm after a boot liner.
Like this

Click image to enlarge
Post #1046027 17th Sep 2024 4:36pm
View user's profile Send private message View poster's gallery Reply with quote
lucky247



Member Since: 23 Aug 2023
Location: London
Posts: 10
United Kingdom 
I don't think the cutouts are the same and it's not going to fold in half when the seats are up.
It's a lot of money for the wrong thing i think!

ruben wrote:
lucky247 wrote:
Have had my new 90 a few weeks now and am looking for a load space/boot liner to cover the boot and seat backs etc when all folded flat.

Does anyone have one, taking account the loadspace tray and resulting flat floor with the seats down?


Thanks


I wonder if a OEM LR 130 load boot liner could cover everything you want, taking advantage of the fact that it already has the necessary shapes and cutouts with precision? Have you thought about this? Could it match the necessary measurements? At least in width it would fit for sure…Im sorry its only one idea!!
I leave a link about it!!

https://www.powerfuluk.com/products/rubber...ow-seating
Post #1046030 17th Sep 2024 4:45pm
View user's profile Send private message View poster's gallery Reply with quote
DrRob



Member Since: 29 Mar 2017
Location: Hampshire
Posts: 243
United Kingdom 
I have a Titan seat cover that I bought for my old L322 Rangie that I now use on the new 90. Good quality stuff and I’d offer to template but I’m too far from them. Somebody on here must be closer Thumbs Up



Click image to enlarge MY25 90 D350 X-Dynamic HSE in Silicon Silver and coil sprung
1974 Series 3 Lightweight = "Millie"
Many Range Rovers and Land Rovers over the years 😂
1949 80" - still in family since 1975
Post #1046031 17th Sep 2024 4:50pm
View user's profile Send private message View poster's gallery Reply with quote
ruben



Member Since: 04 Feb 2021
Location: ASTURIAS
Posts: 318
Spain 
I think the exterior cuts would be correct, although it is true that it might not fold properly with the seats up… sorry, it was just an idea,
I'll keep quiet now!! Defender 110 SE I6 D250 23MY
ExDiscovery 3 TDV6 SE
Post #1046058 17th Sep 2024 10:04pm
View user's profile Send private message View poster's gallery Reply with quote
lucky247



Member Since: 23 Aug 2023
Location: London
Posts: 10
United Kingdom 
Went with a Rhino boot liner in the end.


Click image to enlarge

The most basic one with no seams, split seats etc. Essentially an open ended pond liner for the car.

Comes with elastic to go over the head rests and meters of velcro to fit. I've only used a few short 10cm bits to keep it in place as won't be a permanent fixture for me.

Folds neatly and fits in the raised boot floor tray.

Combined with 3 of these on the back of the rear seats to make pulling them back upright a bit easier.
https://www.amazon.co.uk/dp/B07K6CX42M?ref...itle[/img]
Post #1050797 5th Nov 2024 12:49pm
View user's profile Send private message View poster's gallery Reply with quote
GAT



Member Since: 20 Apr 2013
Location: Kent
Posts: 120
United Kingdom 
Saw this near tome and thought it was a good price. Shame it’s not for a 110.


Click image to enlarge First Edition 90 in Pangea Green. (Gone)
P400 110 in Tasman Blue.
Post #1050799 5th Nov 2024 1:10pm
View user's profile Send private message View poster's gallery Reply with quote
Kev the Rev



Member Since: 04 Jun 2023
Location: Ripon
Posts: 49
United Kingdom 2007 Defender 90 Puma 2.4 HT Keswick Green
Hi Lucky247

Do you know who makes that boot cover in your photo? That's the fitted look I'm after
This is my Defender 90, back seats down, LR dog guard fitted and with the boot leveller in place
I'm thinking about removing the back seats that fold forward because they're not needed and to make a bit more room in the cab. If anyone has any tips on this I would be interested to hear

I have a large sheet of chequer plate type rubber matting to fit on top of the LR hard plastic


Click image to enlarge

Nobody seems to do anything for the L663 90 with seats down and the ones that do have designs that are out of date because the 90 now has the new boot leveller as a standard feature

I'm talking to a company called Stitch and Rivet who can make a fitted cover and the quality looks good



Click image to enlarge
Post #1064717 5th Apr 2025 6:36am
View user's profile Send private message View poster's gallery Reply with quote
lucky247



Member Since: 23 Aug 2023
Location: London
Posts: 10
United Kingdom 
Rhino. As mentioned in my post.
Post #1064739 5th Apr 2025 10:33am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums