Home > General & Technical (L663) > Lane keeping assistance, has it updated? |
|
|
J77 Member Since: 04 Nov 2019 Location: Fife Posts: 3389 |
Can’t say I’ve noticed on my 24MY but then I press the button on the steering wheel which switches speed stuff off and makes the lane assist less sensitive. I’ve never checked the settings it’s just how the salesman recommended it. 24MY 90 D250 HSE, Tasman Blue
|
||
19th Aug 2024 8:47pm |
|
lightning Member Since: 23 Apr 2009 Location: High Peak, Derbyshire Posts: 2735 |
l am an idiot!
It seems l have inadvertently pressed the steering wheel button to turn the system on. Or at least make it more noticeable. l've turned it off and it seems to be back to how it was before. |
||
19th Aug 2024 10:35pm |
|
DFNDER Member Since: 02 Oct 2023 Location: Perth WA Posts: 129 |
It was one of the first things I turned off. I found it too intrusive. Especially in the wet, it appears the reflection off the wet bitumen and water affects the system, I had the wheel jerk violently to the right when there was a puddle on the left hand side of the road. That's not how I want the car to react. I also don't like it when towing the van, when windy the van sways a bit, the lane assist over compensates and you end up wandering all over the road. So it's a no from me.
|
||
20th Aug 2024 12:36pm |
|
DrRob Member Since: 29 Mar 2017 Location: Hampshire Posts: 167 |
When my G$ IID arrives I'll be sorting this out so I don't need to press that little button twice on every ignition cycle to get to Custom.
Nanny state MY25 90 D350 X-Dynamic HSE in Silicon Silver and coil sprung 1974 Series 3 Lightweight = "Millie" Many Range Rovers and Land Rovers over the years 😂 1949 80" - still in family since 1975 |
||
20th Aug 2024 2:37pm |
|
Philm Member Since: 19 Jun 2020 Location: Manchester Posts: 168 |
First thing I did. Stupid bongs.
|
||
20th Aug 2024 4:11pm |
|
lightning Member Since: 23 Apr 2009 Location: High Peak, Derbyshire Posts: 2735 |
Can you change it with the GAP tool? l've not found any information about it. l asked the question but nobody replied.
|
||
20th Aug 2024 7:35pm |
|
Retroanaconda Member Since: 04 Jan 2012 Location: Scotland Posts: 2638 |
They are talking about the driver assistance settings on 24MY vehicles - you can set it to remember your setting (i.e. off) with the tool.
As far as I know there’s no way of disabling the emergency LKA yet. |
||
20th Aug 2024 8:47pm |
|
DFNDER Member Since: 02 Oct 2023 Location: Perth WA Posts: 129 |
Mines a MY23.5, the lane assist is always off unless I turn it on, must be different in the earlier models?
|
||
20th Aug 2024 10:19pm |
|
Moo Member Since: 01 Oct 2021 Location: UK Posts: 1352 |
Same, MY23. Switched it off when I first got it and its never come on. Eiger Grey MY23 D250 SE with bits. Known as Noddy.
|
||
20th Aug 2024 10:43pm |
|
lrFFM Member Since: 28 Sep 2017 Location: Frankfurt Posts: 62 |
I don't know about the UK, but all new cars sold in the EU after July 1st need to have several assistance systems (lane keep assist, emergency braking, speed warning, etc.) turned on when starting the car.
|
||
21st Aug 2024 7:33am |
|
Moo Member Since: 01 Oct 2021 Location: UK Posts: 1352 |
Same in the UK. Not sure if it's the law but we get what Europe gets. Eiger Grey MY23 D250 SE with bits. Known as Noddy.
|
||
21st Aug 2024 8:05am |
|
LR Nuts Member Since: 10 Aug 2022 Location: UK Posts: 1096 |
"Same in the UK. Not sure if it's the law but we get what Europe gets."
..... except LHD |
||
21st Aug 2024 9:40am |
|
Retroanaconda Member Since: 04 Jan 2012 Location: Scotland Posts: 2638 |
Lane keep assist can be turned on and off with the button on the steering wheel and stays off when asked. Emergency lane keep assist is different and is always on unless turned off in the pivi pro menus. It then defaults back to on at every ignition cycle. |
||
21st Aug 2024 9:43am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis