DEFENDER2.NET - View topic - Defender axles.

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Defender axles.

Page 1 of 1

Print this entire topic ·

Kevzeboy

Member Since: 19 Jul 2014
Location: Cumbria
Posts: 82

2011 Defender 110 Puma 2.4 USW Indus Silver

Defender axles.

My defender is needing discs and pads. While the hubs are off the wheel bearings can be, inspected, changed, repacked and new hub seals. (Late 2.4 Tdci, 110, 2011 model)

The seal retainers for swivels have nearly dissolved. They will be getting done too. Probably with stainless retainers.

I have never only ever had a defender hub off on my old td5. It had the single wheel bearing arrangement they my TDCI will. I have been advised to change to the two nut style that series and earlier defenders used.

The questions are:

Should I two nut idea on the wheel bearings? (Adjustable)

Are the wheel bearings all the same size for a defender axles? (I have metric Timkin ones on the shelf that I got for my series. Remember seeing them listed that they would defender too. Even up to late ones)?

What the hub seal rides on. What is the done thing if there is a grove worn? (On my series, they have a ring that you just change. Is it the same arrangement on a defender, or is it a speedi sleeve or stub axle change?

Are the seals in the end of the front axle before where the swivel balls join the same on all defender ages?

I am asking on the basis of not wanting to have the car immobilised in the way waiting for spares and causing a blockage.

Your thoughts are welcomed

Kevin

14th Jul 2024 10:56am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum