 | Home > Technical > ring gear pattern |
 
|
|
|
| geobloke Member Since: 06 Nov 2012 Location: Nottinghamshire Posts: 4410  
|
Looks good to me. Very similar to my efforts when I installed Miffy's ATB.
 If you want to compare I am pretty certain I posted my patterns in the Miffy Workshop thread. |
||
5th Apr 2024 2:18pm |
|
| excossack Member Since: 22 Feb 2012 Location: North West Posts: 5842 
|
Is this going to end up like Readers Diffs? 1999 Defender TD5 110
Regards John M0VAZ Econet Station 48 no clock |
||
|
5th Apr 2024 2:21pm |
|
| geobloke Member Since: 06 Nov 2012 Location: Nottinghamshire Posts: 4410
|
I guarantee no one is ever going to pay for that service...
 |
||
|
5th Apr 2024 3:03pm |
|
| olistr Member Since: 29 Dec 2022 Location: BW Posts: 66 
|
Thx geobloke needed confirmation
|
||
|
5th Apr 2024 5:40pm |
|
| MatLandy Member Since: 11 Sep 2020 Location: Paris Posts: 184  
|
It just happened that I very recently changed the rear diff center of my Puma 110 for an Ashcroft ATB (P38 differential housing). I had excessive play between the side and spider gears, making a "clunk" noise in some situations, which was annoying as the rest of the transmission is pretty tight.
The ring and pinion were still good after 130K, so I re-used those, saved me from having to adjust a new pinion height and preload in the housing. So basically, only a new ATB diff center with its new side bearings kindly pressed in by Ashcroft before shipping (thank you). Anyway, after setting the backlash as per the manual, I checked the pattern and although it looked good to my untrained eyes, I was not sure. Having driven the Landy since on all type of roads including motorways, I am satisfied that it is neither howling nor whining. And the "clunk" is gone. 
Below the pictures of my pattern if you want to compare, similar to yours, so you should be good ?  Click image to enlarge Click image to enlarge /Mat Last edited by MatLandy on 29th Apr 2024 11:45am. Edited 1 time in total |
||
|
6th Apr 2024 5:11pm |
|
| olistr Member Since: 29 Dec 2022 Location: BW Posts: 66
|
That looks good.
I am also keeping housing , pinion , crownwheel, but my preload with the same shim was wrong |
||
|
6th Apr 2024 5:15pm |
|
| geobloke Member Since: 06 Nov 2012 Location: Nottinghamshire Posts: 4410
|
Excellent work Gents. The ATB in the rear is a lovely addition
|
||
|
12th Apr 2024 7:54am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
