DEFENDER2.NET - View topic - Land Rover Spot Switch Into Lazer Loom

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > In Car Electronics > Land Rover Spot Switch Into Lazer Loom

Page 1 of 1

Print this entire topic ·

mcma1

Member Since: 16 Oct 2012
Location: Northern Ireland
Posts: 2892

Land Rover Spot Switch Into Lazer Loom

An easy one for the experts on here but how do I get this LR switch into this Laser loom. No headlights, just switch turns on the lamps?

Should I do the following?

Feed pin 5 from 87

Relay/Lamp grounds 86 from pin 1

Ground for switch to pin 4

Click image to enlarge Andy

2014 Fuji 110 SW LS3
https://www.defender2.net/forum/post751233.html#751233

2014 Corris 110 SW
http://www.defender2.net/forum/topic40056.html

My old Xtech 90 build..
http://www.defender2.net/forum/topic15681.html

LS3 V8 build...
http://www.defender2.net/forum/topic49051.html

9th Apr 2024 1:29pm

PaulMc

Member Since: 17 Jan 2009
Location: Kent
Posts: 500

Take "Battery (-VE)" from relay terminal 86, to pin 1 on the switch.

Wire pin 4 on the switch to earth.

Wire pin 2 on the switch to dash illumination.

Run an additional wire from relay terminal 87, to pin 5 on the switch - for the 'tell-tale' illumination.

. Paul.
1989 Arles Blue 2.5TD 110 Hardtop
1999 Epsom Green Discovery II 4.0 V8i 'XS'

9th Apr 2024 5:33pm

mcma1

Member Since: 16 Oct 2012
Location: Northern Ireland
Posts: 2892

Thanks Paul. Andy

2014 Fuji 110 SW LS3
https://www.defender2.net/forum/post751233.html#751233

2014 Corris 110 SW
http://www.defender2.net/forum/topic40056.html

My old Xtech 90 build..
http://www.defender2.net/forum/topic15681.html

LS3 V8 build...
http://www.defender2.net/forum/topic49051.html

9th Apr 2024 7:34pm

mcma1

Member Since: 16 Oct 2012
Location: Northern Ireland
Posts: 2892

PaulMc wrote:
Take "Battery (-VE)" from relay terminal 86, to pin 1 on the switch.

Wire pin 4 on the switch to earth.

Wire pin 2 on the switch to dash illumination.

Run an additional wire from relay terminal 87, to pin 5 on the switch - for the 'tell-tale' illumination.

.

Sorry Paul 85 to ignition +ve? Andy

2014 Fuji 110 SW LS3
https://www.defender2.net/forum/post751233.html#751233

2014 Corris 110 SW
http://www.defender2.net/forum/topic40056.html

My old Xtech 90 build..
http://www.defender2.net/forum/topic15681.html

LS3 V8 build...
http://www.defender2.net/forum/topic49051.html

10th Apr 2024 5:31am

Likeomg

Member Since: 29 Jun 2012
Location: Lake District / Newcastle
Posts: 2638

2010 Defender 90 Puma 2.4 HT Stornoway Grey

PaulMc wrote:
Take "Battery (-VE)" from relay terminal 86, to pin 1 on the switch.

Wire pin 4 on the switch to earth.

Wire pin 2 on the switch to dash illumination.

Run an additional wire from relay terminal 87, to pin 5 on the switch - for the 'tell-tale' illumination.

.

Think ill re-wire my switches with this advice,

For my lazer's currently it's on / off but like the idea of them illuminating with dash lights / when the LED bar's are on

10th Apr 2024 9:34am

PaulMc

Member Since: 17 Jan 2009
Location: Kent
Posts: 500

mcma1 wrote:
Sorry Paul 85 to ignition +ve?

Yes

Paul.
1989 Arles Blue 2.5TD 110 Hardtop
1999 Epsom Green Discovery II 4.0 V8i 'XS'

10th Apr 2024 12:17pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum