Home > General & Technical (L663) > Headlight protectors |
|
|
Cheshire110 Member Since: 26 Jul 2013 Location: Cheshire/London Posts: 2755 |
I’ve rarely actually see a headlight broken on any car - think the defender ones are polycarbonate and pretty tough.
If you’re worried though perhaps a layer of strong clear tape might help to take the sting out of an impact. “Helicopter tape” or similar perhaps? Cheers, David Land Rovers of all shapes S3 onwards… Daily is a 110 V8. |
||
15th May 2023 10:29am |
|
zilch Member Since: 11 Sep 2019 Location: Whitsundays & Sydney Posts: 818 |
Not to subtle or cheap, but being stainless they should stop rocks damaging the headlights https://newdefendermods.com/en-au/collecti...protectors yet another pommie bar steward down under MY20 110 P400 SE Defender MY10 3.0 RR Sport |
||
15th May 2023 11:12am |
|
LR Nuts Member Since: 10 Aug 2022 Location: UK Posts: 1119 |
Yes, I bought some of those SS Protectors.
Well made and strong, does lake it difficult to clean the headlamp and black surrounds I didn't fit them, they are in the garage. |
||
15th May 2023 11:30am |
|
J77 Member Since: 04 Nov 2019 Location: Fife Posts: 3395 |
A nice set up on the polizia di stato Defender
24MY 90 D250 HSE, Tasman Blue |
||
14th Jan 2024 2:45pm |
|
lightning Member Since: 23 Apr 2009 Location: High Peak, Derbyshire Posts: 2770 |
l've got the stainless ones on my Commercial. No issues cleaning the headlights or surrounds, just push a sponge through.
Last edited by lightning on 4th Mar 2024 2:42pm. Edited 1 time in total |
||
15th Jan 2024 8:41am |
|
stu_007 Member Since: 23 Jan 2014 Location: Cardiff Posts: 99 |
Where are those metal ones from
please? Current 2021 D110 HSE 2013 D90 XS Previous BP07 OZR D110 (1930 YBA) 2007 G4 Mongolian Recce Vehicle BP52GHZ D110 2003 & 2006 G4 Event Vehicle |
||
15th Jan 2024 4:04pm |
|
lightning Member Since: 23 Apr 2009 Location: High Peak, Derbyshire Posts: 2770 |
Just type "Defender L663 headlamp protectors" into Ebay
Couple of tips for fitting. Before sticking them on, offer them up to the headlights and bend them slightly so they sit perfectly on the headlight surrounds. Remove the double sided tape and get some 1cm wide 3M tape instead. The standard tape that they come with loses its adhesive properties in very hot weather and one of mine just fell off while we were parked! Use two layers of tape. l found that in places they touched the wings above the headlights and with two layers of tape it created a small clearance. Not sure that matters, it's up to you. Powerful U.K. also sell them, but more expensive, l don't know if theirs are better in any way, but these Ebay ones l fitted are great (once l replaced the tape) |
||
15th Jan 2024 5:29pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis