DEFENDER2.NET - View topic

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > In Car Electronics > Bloody Alarm

Page 1 of 1

Print this entire topic ·

Poulstonb

Member Since: 30 Jun 2022
Location: Styal
Posts: 88

Bloody Alarm

Afternoon all
I have a 90 2003 xs
Alls been surprisingly well until this week!!!
Now when I lock the car sometimes it’ll unlock straight away , sometimes it’ll lock fine but seconds later alarm will go off or it will lock be fine for hours then unlock itself at some point !
Any ideas where to start ?

14th Jan 2024 2:15pm

Balvaig

Member Since: 19 Feb 2016
Location: Fife
Posts: 732

2016 Defender 90 Puma 2.2 Landmark LE Corris Grey

Hello,
If it has been particularly cold down in Cheshire recently it might be a sticking door lock upsetting the alarm. Worth cleaning out the door locks with brake cleaner and re lubricating.
Alternatively it could be a broken wire in either of the front doors where they enter the doors. The rear door seems less prone to broken wires, but is still a possibility.

The above are the usual suspects, but there are other faults which I am certain others will advise on.

Very much trial and error at this stage.

Good hunting.

14th Jan 2024 2:27pm

Poulstonb

Member Since: 30 Jun 2022
Location: Styal
Posts: 88

Thanks for the suggestions
I’ll give the locks a good clean.
I have changed the rear door actuator before so hopefully that’s one thing it shouldn’t be

14th Jan 2024 2:36pm

Poulstonb

Member Since: 30 Jun 2022
Location: Styal
Posts: 88

So I gave all the locks a good clean with wd40 contact cleaner .
Still the issue if I sit inside and lock it by pushing the button down , sometimes seconds sometimes minutes later the car unlocks itself.
Alternatively if I use the fob to lock and arm the alarm seconds later the alarm goes off .
Any ideas ????

16th Jan 2024 8:44pm

landy andy

Member Since: 15 Feb 2009
Location: Ware, Herts
Posts: 5725

2006 Defender 110 Td5 USW Zermatt Silver

Had very similar on my previous Td5. I swapped the drivers door actuator for new. Never had issue again.

16th Jan 2024 9:20pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20441

Strip the door cards off, lube all of the system with silicone lube it does wonders and it’s probably the cold hardening any residual grease causing the mechanisms to bind up.
It’s a bit like the windscreen wiper rack, a job that needs doing once in a blue moon but will cause trouble eventually, cold weather thickens grease a lot so makes mechanical actuators and motors work harder. $W33T $0U7H3RN $UG4R
🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿🏴󠁧󠁢󠁷󠁬󠁳󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🇮🇪🇺🇸⛽️🛢️⚙️🧰💪

17th Jan 2024 3:35pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum