DEFENDER2.NET - View topic - Three Hole Exhaust Bracket

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Three Hole Exhaust Bracket

Page 1 of 1

Print this entire topic ·

Kidge007

Member Since: 13 Jun 2020
Location: london
Posts: 2

2010 Defender 110 Puma 2.4 DCPU Galway Green

Three Hole Exhaust Bracket

Took my defender 110 TDCI apart to have the gearbox fixed then got unwell.

Normally remember where every thing goes back but just cant figure out where this bracket goes.

PMB500040 is the part number, below is a diagram of the part (Part 20)

https://www.lrworkshop.com/diagrams/land-r...stem_45011

Any pictures as to where I need to screw it!

Thanks

24th Aug 2023 11:45am

John P

Member Since: 26 Dec 2013
Location: West Sussex
Posts: 319

2012 Defender 90 Puma 2.2 SW Corris Grey

It just so happens I have this apart on my TDCI 110 at the moment. Looking from inside the bonnet, it bolts to the turbo flange and then to the exhaust manifold. You can see it in the below picture.

Click image to enlarge

25th Aug 2023 8:29am

Kidge007

Member Since: 13 Jun 2020
Location: london
Posts: 2

Thanks John

I fitted upper turbo heat shield, so I was struggling to see the holes.

Thanks Again

25th Aug 2023 4:41pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum