 | Home > Maintenance & Modifications > Finally getting jobs done on Gloria. |
 
|
|
|
| Plumbers91 Member Since: 30 Jul 2020 Location: Manchester Posts: 56   
|
Hi Everyone, first proper post so thought I'd just share some pictures of a job I've just started. Going to shorten the Bulkhead on Gloria the 200TDI. Ordered the bulkhead reduction kit from Terrafirma and it's been sat there for a while, thought I'd give it a go getting it fitted. In true fashion I chose the wettest day of the week
The kit itself is really simple, just a case of drilling out the old riverts, fitting the U shape strengthening bar to guide where to cut. Here's a few pictures of the job so far. The bulkhead before moving.  Click image to enlarge Drilled out rivets on left and right side. Click image to enlarge Click image to enlarge Bulkhead cut out and nearly ready to put the finishing trim in place. Click image to enlarge Will post again tomorrow with pictures of the finished job. Cheers |
||
13th Mar 2023 8:45pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
