DEFENDER2.NET - View topic - Blown Hole in air inlet manifold

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Blown Hole in air inlet manifold

Page 1 of 1

Print this entire topic ·

natyeo

Member Since: 27 Jan 2013
Location: Bentham
Posts: 136

2014 Defender 90 Puma 2.2 HT Santorini Black

Blown Hole in air inlet manifold

Click image to enlarge
Any one ever had this happen , fault code P0101 , replaced MAF sender , 3 days later whilest green laning , yellow engine light on, limp mode then smoke from under bonnet, jumped out opened bonnet to find more heavy smoke to find burning smell and hole melted in inlet manifold as big as my thumb near EGR in let pipe , fault code P0101 & P2263 , Thinking EGR stuck open with heavy heat build up.

Click image to enlarge 2014 2.2 90 hard top , Warm M8000 , Scorpain winch bumper, Ashcroft rear atb
2012 2.2 tdci 110 Utility
1993 110 CSW Warn M8000 , Scorpain winch bumper , 2" lift , Roamerdive overdrive, on going
1971 Hybird 200tdi, 2 x truetracs,Extrem winch bumper, M8000, GKN overdrive & Coils 2" lift, Glynn Lewis cranked rear trail arms
1971 Series 3 88, Perkins 4203,M8000,SATs,O/D,

13th Nov 2022 4:39pm

landy andy

Member Since: 15 Feb 2009
Location: Ware, Herts
Posts: 5720

2006 Defender 110 Td5 USW Zermatt Silver

How is the engine running??

A melted plastic inlet manifold can often be caused by a stuck, bent valve.

The EGR gasses should pass through a cooler.

13th Nov 2022 9:29pm

piechipsandpeas

Member Since: 12 May 2021
Location: Albany, Western Australia
Posts: 213

2013 Defender 110 Puma 2.2 SW Indus Silver

I had a crack develop in mine in pretty much the same spot last year, thankfully didn't blow a hole in it. Noticed some oily black marks on underside of the bonnet.
A genuine replacement from Ford is much cheaper than the same Ford part from Land Rover.

14th Nov 2022 5:03am

natyeo

Member Since: 27 Jan 2013
Location: Bentham
Posts: 136

Hi landy andy running fine before , Hi piechipsandpeas will look for ford version before I order , cheers 2014 2.2 90 hard top , Warm M8000 , Scorpain winch bumper, Ashcroft rear atb
2012 2.2 tdci 110 Utility
1993 110 CSW Warn M8000 , Scorpain winch bumper , 2" lift , Roamerdive overdrive, on going
1971 Hybird 200tdi, 2 x truetracs,Extrem winch bumper, M8000, GKN overdrive & Coils 2" lift, Glynn Lewis cranked rear trail arms
1971 Series 3 88, Perkins 4203,M8000,SATs,O/D,

14th Nov 2022 6:08pm

natyeo

Member Since: 27 Jan 2013
Location: Bentham
Posts: 136

Replaced inlet manifold with a good second hand one off ebay with new seals, sorted egr out , , after a local had two goes at a re map and stuck in over fuel on dpf, and then bloody fuel pipe breaks and poor parts supply sorted with a mix of old & new, ended up sending ecu to Bell Auto's , back in 3 days with stage 1 150 bhp , great service and running well. 2014 2.2 90 hard top , Warm M8000 , Scorpain winch bumper, Ashcroft rear atb
2012 2.2 tdci 110 Utility
1993 110 CSW Warn M8000 , Scorpain winch bumper , 2" lift , Roamerdive overdrive, on going
1971 Hybird 200tdi, 2 x truetracs,Extrem winch bumper, M8000, GKN overdrive & Coils 2" lift, Glynn Lewis cranked rear trail arms
1971 Series 3 88, Perkins 4203,M8000,SATs,O/D,

11th Feb 2023 10:06pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum