Limfender
Member Since: 28 Mar 2023
Location: Limoux
Posts: 1
 
|
| Defender Puma 110 7 Seater retrim | |
Hello folks,
Just about to take delivery of my first Defender - a 2013 110 7 seater.
I sourced the car in the south of Spain (I live in the South East of France where the prices of a decent Defender are approx 10-20% higher than Spain). The dry climate down there is also a bonus in terms of keeping the rust at bay (or at least slowing it down somewhat!).
The spec is reasonably basic with a few nice upgrades done by the previous owner on the exterior (LED lights, Boost alloys with BFG tires etc). The interior, however, is bog standard basic level spec, albeit pretty fresh and clean.
I have ordered a prototipo black edition steering wheel and a few other goodies to lift the interior. I also ordered the Exmoor trim premium seat cover set for the front (just went with the XS black vinyl with a white stitch) and then the matching seat covers for the 2nd row and rear 2 seats (without the foam)….the usual slippery slope!! 
The instructions seem very straightforward for the front seats, however, I’m struggling to find anything online (or via a search here) for retrimming the 2nd row and rear fold away puma seats? Maybe Exmoor can help me with this but thought I’d ask on here on the off chance anyone has done this job.
Any advice would be much appreciated on this.
Best,
Richard
|
2nd Apr 2023 6:07pm |
|
