Home > Technical > Windscreen washer nozzle replacement |
|
|
SteveK Member Since: 21 Jan 2015 Location: Bromsgrove Posts: 333 |
A good post Hufflepuff!
I received a CSI nozzle as a Christmas present (after a few hints) and fitting took the best part of two days and several trips to the tool shop to purchase deep sockets! I ended up removing the centre console and I accessed the back of the nozzle via a flap at the top of the fibre panel behind the radio space! Getting the nut started on the thread of the new CSI was a pain and in the end I stuffed a load of Blutack in a socket! The spray from the CSI nozzle is fine and I didn’t have to replace or upgrade the pump! |
||
17th Jan 2023 10:37pm |
|
geobloke Member Since: 06 Nov 2012 Location: Nottinghamshire Posts: 4410 |
Just to close this. I did contact Optimal and the result was six perfectly formed and shot jets of washer fluid, so... Optimal windscreen washer service - https://www.defender2.net/forum/topic53859-450.html |
||
18th Jan 2023 11:04am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis