DEFENDER2.NET - View topic - Puma Heater sliding knob removal

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Puma Heater sliding knob removal

Page 1 of 1

Print this entire topic ·

big110

Member Since: 02 Nov 2016
Location: Sweeden
Posts: 342

2014 Defender 110 Puma 2.2 SW Keswick Green

Puma Heater sliding knob removal

I’m trying to pull out the two sliding climate control knobs. These are the rectangular ones that select fan speed and fresh/recirc air. Trying to replace with optimil bits. I cannot for the life of my figure out how they com off to replace them.

Any help is appreciated I don’t want to break anything

Click image to enlarge

1st Jul 2022 7:00pm

kallito

Member Since: 21 Nov 2019
Location: Velturno
Posts: 50

2009 Defender 110 Puma 2.4 SW Alaska White

Hi big110,

Maybe I can help you, I just made my slider control work again as it had melted.

There are guides how to remove the front panel in this forum.
When removed it should look like this:

Click image to enlarge

There are 4 screws that hold the white structure in; remove them and take it out so you can see the back side. I managed to work without removing the cables for the heater controls.
The fan control is held in place with 3 small screws. Remove the connector on the backside of it and the 3 screws. A bit of fiddling and you should be able to slide it out.
In order to get the knob out you’ll have to open the 4 small plastic tabs (gently)
Then you can lift the cover off that reveals the whole mechanism.
Attention: a spring loaded ball holds the slider in its 4 positions.
Then it should be just to replace the plastic peace with your new one and reassemble.
For the air control you’ll have to try to open it. I’ve never had mine apart.

Click image to enlarge

Click image to enlarge "Don't drink and drive. You might spill your drink."

6th Aug 2022 11:32am

macfrank

Member Since: 05 Nov 2015
Location: somewhere in the north
Posts: 1081

2015 Defender 110 Puma 2.2 SW Keswick Green

Just a side note, you know you can slide out the radio while its mounting frame remains in the panel? Makes handling a bit easier IMHO.

6th Aug 2022 4:37pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum