↓ Advertise on Defender2 ↓

Home > Maintenance & Modifications > Rear quarter interior panel on puma defender
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
amccrea



Member Since: 03 Nov 2020
Location: Hampshire
Posts: 2
United Kingdom 2015 Defender 110 Puma 2.2 SW Corris Grey
Rear quarter interior panel on puma defender
New to the forum.

Hoping you can help. I’m fitting new rear quarter windows on a 110. The LR security bolted ones.

Firstly how easy is is to remove the rear side panel? Is it just clips that just prise away or is there anything else I should be aware of?

And secondly I have the interior rear quarter panel removed. I’m trying to work out how it goes back on. Do you put the clips on the metal framework and push them in? Or do you put them in the holes and push them on from there? Also which way around do they go? When they were removed they popped out.

Thank you in advance, I’m a learner!



Click image to enlarge


Click image to enlarge
Post #868787 21st Nov 2020 3:29pm
View user's profile Send private message View poster's gallery Reply with quote
LandRoverAnorak



Member Since: 17 Jul 2011
Location: Surrey
Posts: 11324
United Kingdom 
To remove the side panel:
    1. Prise open the covers on each end of the grab handle with e small screwdriver and remove the four large self-tapping screws concealed beneath .
    2. Remove the two fir tree fixings from the lower edge, within the seat recess.
    3. Remove the large fir tree fixing from the leading edge of the panel, within the side door recess.
    4. Unbolt the lower fixings for the second and third row seat belts.
    5. Pull the lower edge of the panel towards you and then lift to release the clips along the top edge that sit in the roof internal gutter.


To fit the clips on the end panel, push the smaller opening - the side nearer to the white squiggle in your picture - onto the metal bracket on the panel. You'll see two sharp teeth on the return and these sometimes need bending back into shape, or the whole thing needs squashing slightly with pliers, so that the clip will grip properly. The wider part of the clip then gets pushed on to the metal lip of the door opening, typically with a thump on the panel from the palm of your hand.

Hope that helps. Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia
Post #868794 21st Nov 2020 4:16pm
View user's profile Send private message View poster's gallery Reply with quote
Dinnu



Member Since: 24 Dec 2019
Location: Lija
Posts: 3421
Malta 2012 Defender 90 Puma 2.2 CSW Santorini Black
Lucky that your clip did not break. The quarter panel trim are a b!+c# to prise out. I tried applying some grease on the paint work for the clip to ‘slide’ easier for the next time (which was soon after, as wanted a reversing camera) but not much of an improvement. Hence I stocked my spares bin Laughing

LRA is spot on in his description. 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black
Post #868816 21st Nov 2020 5:50pm
View user's profile Send private message View poster's gallery Reply with quote
amccrea



Member Since: 03 Nov 2020
Location: Hampshire
Posts: 2
United Kingdom 2015 Defender 110 Puma 2.2 SW Corris Grey
Thanks Darren and Dinnu. Great Info!

I wasn't sure whether or not the clips went in the brackets first or on the frame and then pushed into the brackets.
Post #868857 21st Nov 2020 8:25pm
View user's profile Send private message View poster's gallery Reply with quote
John P



Member Since: 26 Dec 2013
Location: West Sussex
Posts: 322
United Kingdom 2012 Defender 90 Puma 2.2 SW Corris Grey
Dinnu wrote:
Lucky that your clip did not break. The quarter panel trim are a b!+c# to prise out. I tried applying some grease on the paint work for the clip to ‘slide’ easier for the next time (which was soon after, as wanted a reversing camera) but not much of an improvement. Hence I stocked my spares bin Laughing

LRA is spot on in his description.


My clips broke. Does anybody know where I can get some replacements or what they are called so I can search for some?
Post #953097 21st May 2022 1:16pm
View user's profile Send private message View poster's gallery Reply with quote
Dinnu



Member Since: 24 Dec 2019
Location: Lija
Posts: 3421
Malta 2012 Defender 90 Puma 2.2 CSW Santorini Black
I got a few from Paddocks. BTR6682 Edge Clip 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black
Post #953106 21st May 2022 4:23pm
View user's profile Send private message View poster's gallery Reply with quote
John P



Member Since: 26 Dec 2013
Location: West Sussex
Posts: 322
United Kingdom 2012 Defender 90 Puma 2.2 SW Corris Grey
Excellent thank you. Got some on order. 👍
Post #953122 21st May 2022 6:18pm
View user's profile Send private message View poster's gallery Reply with quote
LandRoverAnorak



Member Since: 17 Jul 2011
Location: Surrey
Posts: 11324
United Kingdom 
If you put that part number into eBay, you'll also find lots of options. Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia
Post #953137 21st May 2022 9:03pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums