DEFENDER2.NET - View topic

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Heater blower

Page 1 of 1

Print this entire topic ·

itsdashy

Member Since: 20 May 2021
Location: Reading
Posts: 72

2012 Defender 90 Puma 2.2 PU Orkney Grey

Heater blower

Had to replace the wing ducting and now I know why the previous person decided to delete it. What an awkward job only made worse by having AC.

Next job drilling out a snapped half shaft bolt. So yay. I suppose it's a baptism of fire for me.

17th Mar 2022 11:24pm

matchap801

Member Since: 05 Aug 2021
Location: Somerset
Posts: 120

2009 Defender 90 Puma 2.4 CSW Zermatt Silver

Good luck. 8 months into ownership and I still love my 90 but so mich work and and so much left to do.
I fitted one piece rear drive shafts from a Disco 1 - cleared a lot of the clonk, A Frame joint did the rest! Was so worried about the bolts snapping but luckily all went well.
Currently ripping out, stripping, cleaning and refitting the EGR, inlet manifold, intercooler and VCV. Hands are shredded and only one failed bolt so far! 2009 Defender 90 CSW 2.4 TDCI.
Ex Army Mechanic still living the dream.

18th Mar 2022 10:36am

itsdashy

Member Since: 20 May 2021
Location: Reading
Posts: 72

Strange you should say that but my Disco 1 half shafts are arriving today!

18th Mar 2022 10:39am

matchap801

Member Since: 05 Aug 2021
Location: Somerset
Posts: 120

Good news about the half shafts. I changed the diff oil after I replaced mine. Quite a strange colour 😟 2009 Defender 90 CSW 2.4 TDCI.
Ex Army Mechanic still living the dream.

18th Mar 2022 11:28am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum