↓ Advertise on Defender2 ↓

Home > Modifications & Maintenance (L663) > Fold down table.
Post Reply  Down to end
Page 1 of 4 1234>
Print this entire topic · 
G4R1



Member Since: 17 Aug 2020
Location: Barnet/Limassol
Posts: 131
United Kingdom 
Fold down table.
Just wanted to share with you a little modification I have done earlier today. Very pleased with the outcome.
Total cost £80, installation time 1 hour.





Click image to enlarge



Click image to enlarge




Click image to enlarge

Last edited by G4R1 on 7th Jan 2021 3:49pm. Edited 1 time in total
Post #876875 7th Jan 2021 3:26pm
View user's profile Send private message View poster's gallery Reply with quote
Gareth



Member Since: 12 Dec 2011
Location: Bramhall
Posts: 1101
England 
That’s very neat! 2021 Defender 110 X-Dynamic HSE D300 MHEV
1966 S2a 109 aka Betsy
1968 S2a 88 aka Bob
2014 Jaaaag F Type 3.0 Supercharged.
Post #876877 7th Jan 2021 3:32pm
View user's profile Send private message View poster's gallery Reply with quote
Simon Audi



Member Since: 19 Nov 2020
Location: Newport
Posts: 544
United Kingdom 
A kit of parts - that you fitted or all made from scratch or?
Post #876882 7th Jan 2021 4:02pm
View user's profile Send private message View poster's gallery Reply with quote
G4R1



Member Since: 17 Aug 2020
Location: Barnet/Limassol
Posts: 131
United Kingdom 
It basically a fold-down table for Jeep Wrangler
https://www.amazon.co.uk/dp/B07GWYMKTF/ref=dp_prsubs_1


And a set of brackets
https://www.amazon.co.uk/gp/product/B08HWH...&psc=1


Also, you will need x4 M6 bolts about 30-35mm long.


You also will need to drill x6 6mm holes (4 holes in the table bracket) and 2 holes in the 2 of the 4 angle brackets) 3.0L MHVE D200 S Pangea Green+Black Pack
Adv. + Off-Road and Family Packs
Post #876884 7th Jan 2021 4:16pm
View user's profile Send private message View poster's gallery Reply with quote
Simon Audi



Member Since: 19 Nov 2020
Location: Newport
Posts: 544
United Kingdom 
THANKS
Post #876886 7th Jan 2021 4:23pm
View user's profile Send private message View poster's gallery Reply with quote
denhams



Member Since: 21 Jul 2020
Location: Las Vegas
Posts: 26
United States 
G4R1 wrote:
It basically a fold-down table for Jeep Wrangler
https://www.amazon.co.uk/dp/B07GWYMKTF/ref=dp_prsubs_1


And a set of brackets
https://www.amazon.co.uk/gp/product/B08HWH...&psc=1


Also, you will need x4 M6 bolts about 30-35mm long.


You also will need to drill x6 6mm holes (4 holes in the table bracket) and 2 holes in the 2 of the 4 angle brackets)


Neat solution. Any rattles? Is it bolted or riveted through the panel? I can't make out from the photos. If it's bolted, how easy is it to remove the panel? 1981 Series III 88 Santana Especial
2020 Defender 110 SE
2023 Tesla Model 3 RWD
Post #876956 7th Jan 2021 10:38pm
View user's profile Send private message View poster's gallery Reply with quote
SN



Member Since: 29 Jun 2007
Location: SK6
Posts: 729
Like this... a lot. Bow down

Many thanks! Thumbs Up Steve N | 21MY Defender | 08MY Discovery 3 (history) | 06MY Discovery 3 (ancient history)
Post #876961 7th Jan 2021 11:12pm
View user's profile Send private message View poster's gallery Reply with quote
LandRoverAnorak



Member Since: 17 Jul 2011
Location: Surrey
Posts: 11324
United Kingdom 
That's very neat - looks like it was always intended to be there. Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia
Post #876970 8th Jan 2021 6:34am
View user's profile Send private message View poster's gallery Reply with quote
G4R1



Member Since: 17 Aug 2020
Location: Barnet/Limassol
Posts: 131
United Kingdom 
It is bolted using the existing holes/nuts, you don’t have to remove the panel. Just remove 4 bolts, 2 on each side of the panel and replace them with longer bolts (about 35mm long) to fix the angle brackets. 3.0L MHVE D200 S Pangea Green+Black Pack
Adv. + Off-Road and Family Packs
Post #876972 8th Jan 2021 6:59am
View user's profile Send private message View poster's gallery Reply with quote
DSL



Member Since: 20 Aug 2007
Location: Wandering the wasteland.
Posts: 837
United Kingdom 
Very nifty indeed. Bow down Bow down Thumbs Up
Post #876975 8th Jan 2021 8:07am
View user's profile Send private message View poster's gallery Reply with quote
SN



Member Since: 29 Jun 2007
Location: SK6
Posts: 729
I notice there are a few variants of these tailgate drop tables for Jeeps on Amazon.

This one caught my eye - no idea whether it fits as well as the one above - seems to be about 48mm longer (before the extender is pulled out) so not sure whether it would still fit on the existing Defender bolt holes as shown above (I think that one 600 wide))

https://www.amazon.co.uk/Front-Runner-Drop...K9QZNFGCWQ


Click image to enlarge Steve N | 21MY Defender | 08MY Discovery 3 (history) | 06MY Discovery 3 (ancient history)
Post #876986 8th Jan 2021 9:14am
View user's profile Send private message View poster's gallery Reply with quote
G4R1



Member Since: 17 Aug 2020
Location: Barnet/Limassol
Posts: 131
United Kingdom 
The distance between the existing screws is 660mm, I believe this version will work just fine, obviously will require 4 holes on the back of the table mount or a couple of angle brackets to match existing holes in the tailgate panel.

The version I installed the table itself is 600mm wide including the mounts is 628mm. 3.0L MHVE D200 S Pangea Green+Black Pack
Adv. + Off-Road and Family Packs
Post #877137 8th Jan 2021 6:40pm
View user's profile Send private message View poster's gallery Reply with quote
PaulMark



Member Since: 29 May 2020
Location: Johannesburg
Posts: 33
South Africa 2015 Defender 110 Puma 2.2 SW Alpine White

Click image to enlarge


Click image to enlarge
SN wrote:
I notice there are a few variants of these tailgate drop tables for Jeeps on Amazon.

This one caught my eye - no idea whether it fits as well as the one above - seems to be about 48mm longer (before the extender is pulled out) so not sure whether it would still fit on the existing Defender bolt holes as shown above (I think that one 600 wide))

https://www.amazon.co.uk/Front-Runner-Drop...K9QZNFGCWQ


Click image to enlarge


Have this table fitted to mine.
Post #877419 10th Jan 2021 10:03am
View user's profile Send private message View poster's gallery Reply with quote
LandRoverAnorak



Member Since: 17 Jul 2011
Location: Surrey
Posts: 11324
United Kingdom 
That's a very useful table with the pull out board underneath but I've got to ask - why is it off centre? Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia
Post #877421 10th Jan 2021 10:21am
View user's profile Send private message View poster's gallery Reply with quote
PaulMark



Member Since: 29 May 2020
Location: Johannesburg
Posts: 33
South Africa 2015 Defender 110 Puma 2.2 SW Alpine White
That’s just how front runner installed it and it’s never bothered me enough to warrant drilling more holes in the table.
Post #877425 10th Jan 2021 10:35am
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 1 of 4 1234>
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums