Home > Puma (Tdci) > gear selection wows |
|
|
wyvern Member Since: 13 Dec 2009 Location: Cornwall Posts: 2101 |
Hi all
did a quick search but could not find the same issue on here ... Driving back from Scotland this week and all well till I came off the motorway and entered normal traffic. Went to change from 6h down the box and found it very hard to engage any other gear. Managed to get to a safe are and try all gears but not able to engage any of the them Turned the engine off and it all gears selected with no issues at all, start again and the same problem Tuned off the engine and selected 3rd and slowly pulled away - with much juddering and all gears were able to engage again with the occasional ‘sticky’ gear at times Drove the remaining 400 miles home with no real issues other then me being extra cautions when changing gear ... any ideas what this may be ? Clutch ? output shaft? selector ? (expensive!) many thanks for your help Poppy - TDCI (Puma) 110XS 2.2 - Camper conversion - see the build here - https://www.defender2.net/forum/topic56530.html Elgar -TDCI(Puma) 110XS Dormobile - now sold Devon & Cornwall 4x4 Response - DC126 |
||
23rd Oct 2021 8:06am |
|
wyvern Member Since: 13 Dec 2009 Location: Cornwall Posts: 2101 |
Hi Daz
Cheers for that no rattle from the clutch as far as I can tell - (but I am rather deaf!!) - and no issues getting out of gear .. just could not select any gear at the time .. Clutch feels normal at the moment but will investigate to see if there is a rattle there. Poppy - TDCI (Puma) 110XS 2.2 - Camper conversion - see the build here - https://www.defender2.net/forum/topic56530.html Elgar -TDCI(Puma) 110XS Dormobile - now sold Devon & Cornwall 4x4 Response - DC126 |
||
23rd Oct 2021 9:23am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis