DEFENDER2.NET - View topic - Defender Puma 2.4 Brake Pipes

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Defender Puma 2.4 Brake Pipes

Page 1 of 1

Print this entire topic ·

matchap801

Member Since: 05 Aug 2021
Location: Somerset
Posts: 120

2009 Defender 90 Puma 2.4 CSW Zermatt Silver

Defender Puma 2.4 Brake Pipes

Well I took the plunge today and started replacing the full set of brake pipes.
I have been working through a list of MOT advisories as well as doing a few of the bits I wanted.
MOT - All steering ball joints, A frame ball joint (all done) and now the brake pipes.
After lots of questions backwards and forwards, I found someone on eBay to build a set to my measurements.
I have replaced both rear left and right and the front to rear so far. Doing the rest tomorrow.
Not easy at all. I tried bend the pipes with a set of pipe pliers but they aren’t so good - so have returned to bending by hand or around a wooded file handle clamped in my work mate. Have fitted an OEM T-Piece and also using stainless steel flexi pipes.
Tried taking photos, but they don’t make a lot of sense.
The the front to rear pipe, I found it easier to shape the section down the bulk head, then drop it through from above the engine and pull it / bend it along the chassis to the rear.
Will add more info tomorrow.

4th Feb 2022 8:06pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum